Hausted® All Purpose Chair (APC) Electric/battery powered Models Design Features Hausted all purpose chairs are an easily The brake and steer system with 5" adjustable patient transport and treatment (127 mm) casters has three modes of device. The chair's backrest can be operation: steer, neutral, and brake. Brake positioned from sitting to supine, and levers for this system are accessible at all provides a stable working surface during four corners of the chair's base, and steer patient treatment. Height positioning, as levers for this system are accessible at the well as backrest and leg section adjust- rear corners of the chair's base. ment, is electric/battery powered and is activated with a hand held control. Four easy-rolling, steerable casters allow for The electric/battery powered positioning and adjustment system features maximum mobility and maneuverability. a hand held control for use either by the allows height adjustment, backrest and leg The all purpose chair meets the applicable requirements of the patient or care provider. Hand held control section angle. Hand held control is placed in a storage bracket when not in use. following standards: (Typical only - some details may vary.) The Hausted® All Purpose Chair (APC) is a multi-position chair and stretcher intended for intra- and inter-departmental transport EN60601-1-2 Medical Device Directive 93/42/EEC UL2601-1 of patients within a health care facility. The APC can be positioned to allow for patient Backrest Release Lever treatment, transport or recovery. A manually controlled emergency release lever is provided to override electric/battery powered control of the backrest in emergency situations (electric/battery powered function resumes without reset). The Selections Checked Below Apply To This Equipment Model q EPC-250-ST (120 Volt Model) q EPD-250-ST (230 Volt Model) Item Location(s)

Material Specifications Base Frame 1‑1/4" (32 mm) ‑ 15-gauge square, high-strength/low-alloy tubing, with nickel plated finish. Base cover is thermoformed ABS plastic. Columns Extruded aluminum. Hand Held Control Electric/battery powered controls operate from any standard 120 VAC supply (a 230 Volt model is also available). A 24 VDC integral backup battery provides height adjustment and positioning for transport and emergency use. The thermoformed base cover is seamless and easy to clean. The adjustable patient surface is provided in Top Frame Made from 1" (25 mm) diameter, 16-gauge carbon steel...

Standard features • Built-in chart holder • Built-in drainage bag hook • Fold-down foot rest (height adjustable) electrical specifications • PC250 Model E Input Voltage: 120 VAC, +5%, 60 Hz Amperage: Max. 3.5 A general specifications • Height - 12" (305 mm) • Length - 28.375" (721 mm) • Powder-coated support surface • 24 VDC backup battery operation • Six universal accessory wells • Removable I.V. rod Duty Cycle: 10% 6 min. in 1 hr. • EPD250 Model Amperage: Max. 1.9 A Maximum Weight Capacity hand held control • Emergency backrest release lever • Backrest - 0-80° • Trendelenburg - 6° • 2.5" (64 mm)...

For further information, please contact: 334.215.5151 Main 877.706.5151 Toll Free 334.215.5150 Fax 2511 Midpark Drive Montgomery, AL 36109 This data is intended for the exclusive use of Hausted® Customers, including architects or designers. Reproduction in whole or in part by others is prohibited. SD-660 ©2010, HAUSTED® Patient Handling Systems All rights reserved. MC (9/19/2012)