Mini hydraulic power pack type A
1 / 16Pages

effective volume (tank): 0.2 to 0.8 L

Product characteristics Compact hydraulic power packs are a type of mini hydraulic power unit. They are characterised by a highly compact design, since the motor shaft of the electric motor also acts as the pump shaft. The Type-A compact hydraulic power pack is characterised by a modular design. An external gear pump is ange-mounted onto the equipment rack in the hydraulic power pack. The oil tank is a round, plastic tank with an M 14x1.5 lling screw. Version A 100 comes with a choice of two equipment racks (Q and H), which can be used to mount a range of motors, pumps and tanks. The...

Technical dataGeneral weight without hydraulic fluid A 065 A 100 A 100 A 100 A 100 A 100 ambient temperature A 065 A 100 sound pressure level (distance 1 m, decoupled fastening) A 065 tank volume tank size 1: 0.4 L effective volume tank size 1: 0.2 L (flat) tank size 2: 0.4 L effective volume tank size 1: 0.3 L (upright) tank size 2: 0.5 L 57 dB(A) 57 dB(A) 55 dB(A) 55 dB(A) 55 dB(A) 60 dB(A) A 065 tank size 1: 0.23 L tank size 2: 0.3 L tank size 3: 0.43 L tank size 1: 0.18 L tank size 2: 0.25 L tank size 3: 0.38 L

pump design temperature hydraulic fluid viscosity maximum operating pressure permissible degree of pollution filter retention rate Electrical parameters Hydraulic parameters Hydraulic fluid: mineral oil according to DIN 51524, other media on request external gear pump A 065 +10 to +40 °C motor The rotation direction of the motor is left, looking at the shaft. voltage rated output duty cycle electrical connection protection class

motor F2E: 12 V DC 350 W The rotation direction of the motor is left, looking at the shaft. voltage rated otput duty cycle* up to 40 % (depends on je nach delivery ow, pressure, environmental condition) electrical connection protection class based on one work cycle engine HAWE Hydraul

voltage rated output duty cycle1 electrical connection protection class motor A4D: 24 V DC 100 W The rotation of the motor is Left, Looking at the shaft. 24 V (DC) 100 W up to 40 % (depends on je nach delivery fLow, pressure, environmental condition) 2 x eyelet AWG 16 (1100 mm) red +, black -IP50 concerning to DIN 40050 based on one work cycle engine (10 min)

DQ£03 HYDRAULIK motor B2D: 24 V DC 200 W Drehrichtung der Motorwelle: Links (auf die Welle gesehen) * based on one work cycle engine (10 min)

voltage rated output duty cycle* up to 40 % (depends on je nach delivery ow, pressure, environmental condition) electrical connection eyelet: 1 x M6 and 1 x M8 1 x 6.3 x 0.8 für at push-in sleeve protection class rotation direction left (looking at the shaft) based on one work cycle engine (10 min)

voltage rated output duty cycle1 electrical connection protection class rotation direction 230 V (AC) 120 W up to 40 % (depends on je nach delivery flow, pressure, environmental condition) cables with ferrules IP44 concerning to DIN 40050 left (looking at the shaft) based on one work cycle engine (10 min)

Dimensions are given in mm. mechanical connection - 2 x M6 (pump m°unt) - preferably suspension elastical hydraulic connection

Order informationType code throttle valve Q3D00 1 2/2-poppet bypass valve 24 V = (DC) SP32 CMD 2 2/2-poppet bypass valve 12V = (DC) SP32 CME * design H only (obligatory); not used in design Q

design H V DC A 100 motor F2E: tank size: 1, 2 or 3 0.35 kW; 12 V DC motor R2E: tank size: 1, 2 or 3 0.25 kW; 24 V DC A 100 motor F2E: 0.35 kW; 12 V DC motor A4D: 0.1 kW; 24 V DC motor B2D: 0.2 kW; 24 V DC motor R2E: 0.7 kW; 12 V DC