hm 8000 AS/AS-V SealCut
6Pages

{{requestButtons}}

Catalog excerpts

hm 8000 AS/AS-V SealCut - 1

hm 8000 AS/AS-V SealCut Pouchmaking machine for the automatic PRODUCTION of flat and gusseted pouches

Open the catalog to page 1
hm 8000 AS/AS-V SealCut - 2

hm 8000 AS/AS-V SealCut To deliver maximum flexibility and cost-effectiveness, hawo has developed a fully automatic pouchmaking machine, known as the hm 8000 AS/AS-V SealCut (V =validatable). This innovative machine combines a film reel dispenser and a heat sealer to automatically produced sterile goods pouches from standard reels in the required quantity and length. The material consumption is kept to a minimum, since the pouch length can be determined on a customised basis. With an output of up to 5,000 bags per hour and compact dimensions, this machine is at the top of its device class....

Open the catalog to page 2
hm 8000 AS/AS-V SealCut - 3

hm 8000 AS/AS-V SealCut (V=validatable) Regardless of whether flat or gusseted reels made from paper/ plastic or Tyvek®/plastic are used, the material consumption is kept to a minimum, since the pouch length can be determined on a customised basis. The small footprint of 74 cm / 29 in and the fact that no inlet or outlet area is required on either side means that the device can be used in even the smallest of spaces. HIGH PRODUCTIVITY. The high production rate, which results from up to 14 cycles per minute (over 800 cycles per hour), allows film pouches to be produced cost-effectively. The...

Open the catalog to page 3
hm 8000 AS/AS-V SealCut - 4

hm 8000 AS/AS-V SealCut Validation. ISO 11607-2 and the new international ISO/TS 16775 guidance document explicitly require validated packaging processes. Heat sealers must therefore be able to control and monitor critical process parameters. According to ISO/TS 16775 these are: > sealing temperature > contact pressure and > sealing time (dwell) In the event of a deviation from the preset value (e.g. 190 °C / 375 °F), the device must be switched off and/or the enduser alerted. The hm 8000 AS-V controls and monitors the critical process parameters. The hm 8000 AS-V also features the option...

Open the catalog to page 4
hm 8000 AS/AS-V SealCut - 5

up to 14 cycles/min (>840 Cycles/hour) depending on the pre-adjusted sealing time 5,000 pouches/hour 1 up to 14 cycles/min (>840 Cycles/hour) depending on the pre-adjusted sealing time 5,000 pouches/hour 1 Adjustment quantity of pouches Adjustment pouch lengths Width of seal seam and cutting lenghts, roll holder medical practice hospital and medical industry medical practice hospital and medical industry GS-certifed (tested safety) PERFORMANCE FEATURES Mains connection Stainless steel AISI 304 casing cover Seal seam Distance to medical device (ISO/TS 16775) Reel holder (incl. 2 reel...

Open the catalog to page 5
hm 8000 AS/AS-V SealCut - 6

CONTROL FUNCTION IN ACCORDANCE WITH ISO 11607-2 and ISO/TS 16775 Sealing process automatic/reproducible automatic/reproducible Switch-off tolerance +/-5°C (ISO/TS 16775) x x Alarm and machine stop in case the monitored x x parameters exceed predetermined limits hawo USB-stick for process documentation x x hawo IntelligentScan barcode scanner x x (with HS 980 BR software for generating barcode lists) ValiPrint barcode printer x x Sorting unit hm 8000 SD (flexible adjustable) x x Reel holder fixation set hm 8000 RF x x Seal Check med indicator strips x x hawo InkTest dye penetration test x x...

Open the catalog to page 6

All Hawo catalogs and technical brochures

  1. hm 850 DC-V

    6 Pages

  2. hm 780 DC-V

    6 Pages

  3. hm 780 DC

    6 Pages

  4. ht 150 SCD

    4 Pages

  5. hawo viú-2

    2 Pages

  6. hd 680 DE

    4 Pages

  7. hm RS

    2 Pages