chassis A stable base for moulded seats & backs PUSH BAR Height adjustable FIXED BACK ANGLE The back support has a fixed angle and is available in two adjustable versions, 90-105° and 105-120° CAREGIVER BRAKES Combination service and parking brakes FIXED SEAT PLATE Seat depth is set to desired position and fastened with two screws under the seat TRANSPORT MOUNTS Designated attach points in front, integrated in back REINFORCED HD Balance Chassis has reinforced wheel frame, seat frame, and back frame ANTI-TIP DEVICES 3 setting postions, easily rotated up SEAT TILT 0-20° USER BRAKES (24” model) MODEL 24 24” polyurethane drive wheels, aluminium hand rims MODEL 16 16” polyurethane drive wheels HD Balance Chassis maintains the same high quality as our other wheelchairs. The chassis is stable, has good handling, and is easy for caregivers to use. These characteristics make HD Balance Chassis an excellent choice when using moulded seats and back supports. Most regular HD Balance accessories are also suited to HD Balance Chassis. Assessment of what can be used in combination with moulded seats and backs should be done in each individual case by technical personnel.

Seat width Height, seat plate to floor Width across back tubes Total length, standard mod. Total width Height, collapsed Total weight Total length, extended mod. 103 cm Total height (back 90°) 1050 cm Seat width Height, seat plate to floor Width across back tubes Total length, standard mod. Total height (back 90°) 1050 cm Total width Height, collapsed Total weight Total length, extended mod. 103 cm Article number HD Balance Chassis 16, extended HD Balance Chassis 24, extended