Model 2101KL Digital Handrail Scale

Model 2101KL Thank you for your purchase of this Health o meter® Professional product. Please read this manual carefully, and keep it for easy reference or training. Note: This scale has been factory calibrated, and does not require calibration prior to use. Please register your scale for warranty coverage at: http://www.homscales.com/customer/registration.aspx For User Instructions updates and revisions, please go to: http://www.homscales.com

To prevent injury and damage to your scale, please follow these instructions very carefully. Assemble and operate the scale per the enclosed user instructions. Operate this scale exclusively with the AC adapter provided by Health o meter. Use of an unspecified adapter will void the warranty, and can pose a serious safety hazard. Prior to using this scale, inspect the AC adapter cord for cracking / fraying, or for broken / bent plug prongs. Prior to using this scale, ensure that the AC adapter is plugged into an outlet with the rated voltage appropriate for operation. Ensure that the AC adapter...

SPECIFICATIONS FOR THIS SCALE General The Model 2101KL Digital Handrail Scale uses highly sophisticated microprocessor technology. Each precision scale is designed to provide accurate, reliable and repeatable weight measurements. In addition, each scale is designed to provide the user with features that make the weighing process simple, fast, and convenient. This scale is set up to use motion-sensing weighing technology in order to determine the actual weight of a moving patient. Weight can be displayed in pounds or in kilograms. The scale features a wrap-around handrail for patient comfort and...

CERTIFICATIONS / CONNECTIVITY / DISPOSAL Certification Descriptions Pelstar, LLC has been officially certified as the manufacturer of Health o meter® Professional medical devices. The Pelstar, LLC quality assurance system covers the development, production, sales and service of medical scales and measuring systems. This product is tested to and meets the requirements of: 1. UL60601-1 First Edition: Safety for Medical Electrical Equipment 2. CSA C22.2 No. 601-1 M90: Medical Electrical Equipment 2101KL Scale Connectivity Information To enable reliable transmission of weight, height, and Body Mass...

2101KL ASSEMBLY INSTRUCTIONS Before Assembly Each 2101KL digital handrail scale is shipped disassembled in a single carton. Carefully inspect the carton for shipping damage before unpacking. If damage is found, contact your shipper or a Health o meter® Professional representative immediately at 1-800-815-6615. Claims must be filed with the shipper as soon as possible after receipt of the package. The following information details what you will find inside the main carton as you unpack the parts for assembly. To prevent scratching any components, carefully remove each assembly from the carton...

2101KL ASSEMBLY INSTRUCTIONS (CONTINUED) Assembling the 2101KL Scale (Refer to Figures 1-6) Caution: It is recommended that the assembly be performed by two persons. 1. Remove the scale platform from the carton and place scale platform on a flat, level and dry surface. 2. Locate and pick up the center handrail. Find the load cell cable connector, located at the bottom of the center handrail. Untie it and pull it out the bottom (see Figure 3). 3. Position the center handrail over the platform and feed the cable through the large center hole of the right handrail mounting hole array in the platform....

2101KL ASSEMBLY INSTRUCTIONS (CONTINUED) 16. Place the pivot bracket screw covers over the pivot screws. Fasten the covers to the back of the display using (4) Phillips pan head #5 x 3/8 screws (E). Use Phillips head screwdriver to tighten the screws (see Figures 1 & 4). 17. Attach the adapter holder to the center handrail using (2) #8 x ½ sheet metal screws (D). Use Phillips head screwdriver to tighten the screws. (see Figures 1 & 2). 18. Connect the AC adapter to the power port in the display. Do not plug the scale into a power source until the scale is fully assembled (see Figure 5). 19. Attach...

2101KL ASSEMBLY INSTRUCTIONS (CONTINUED)

2101KL ASSEMBLY INSTRUCTIONS (CONTINUED) Holes arrays Load cell cable Center handrail Scale platform

2101KL ASSEMBLY INSTRUCTIONS (CONTINUED) Protective metal shield Cable connector Load cell port

SETUP / BATTERIES Preparing the 2101KL Scale for Use 1. Remove the protective plastic film covering the display (the film says “FACTORY CALIBRATED”). 2. Place batteries into the battery holder (see “Replacing / Inserting Batteries” information below). 3. Connect the AC adapter into the adaptor jack on the display assembly. Warning: To avoid a safety hazard, use AC adapter model ADPT30. 4. Plug the scale’s AC adapter into the power source. 5. Ensure all objects are removed from the scale’s platform, and then press the ON/OFF button to turn the scale on. The display will show “Start”, then “0.0”...

SETUP / BATTERIES (CONTINUED)

QUICK START / OPERATING INSTRUCTIONS Keypad Function ON/OFF ZERO HOLD/RELEASE ► BMI RECALL TARE/PRETARE UNIT/▲ REWEIGH ENTER Description Turns scale on and off. Zeros the scale prior to a weighing. Holds the weight value of the patient on the display until the button is pressed again to clear the value. Also moves the cursor from left to right on the display for entering height and pretare value. Prompts entry of height data to calculate patient’s Body Mass Index (BMI). Recalls the previous weight. TARE-Tares out weight of an object on the platform. PRETARE-Prompts entry of a tare value that...

QUICK START / OPERATING INSTRUCTIONS (CONT) Tare Function When using this scale, the weight of an object, such as a chair, can be subtracted from the total weight in order to determine the weight of the patient alone. The Tare Function automatically performs this subtraction. The 2101KL scales allow tare weight to be entered manually by using the keypad, or automatically, as outlined in this section. TARE 1. With all weight off the scale, press the ON/OFF button to turn on the scale. 2. Wait until the “0.0” LB or “0.0” KG appears on the display. 3. Place the object on the scale. The display will...