HPL Single Function Recessed Linear Tunable White Lumina
9Pages

Type: Project: Single Function Recessed Linear Tunable White Luminaire • Single function ambient light fixture with 2700K to 6500K tunable white capabilities • Recessed 4" x 24"/ 36"/ 48" / 72"/ 96" linear lengths • Single or paired fixture selection • Versatile mounting trims for sheet rock w/ flange, sheet rock trimless mud-in, or grid ceiling types F Snap-in acrylic lens provided uniform illumination Symmetric or asymmetric light distributions available nLight® nTune wired interface IP64 Wet Location standard, NSF Splash Zone 2 standard, and MIL-STD 461G with added RIF filter Trimless Mud-In Trimless Mud-In PERFORMANCE DATA Lumen Output Lumen values are from photometric tests from an accredited laboratory. Data is considered to be representative of the configurations shown, within generally accepted industry tolerances. *Performance data based upon 48LONG/RHYR(27K/46K/65K)/90CRI/NX Ambient Nominal Lumens/FT Distribution CCT Delivered Lumens/FT Input Watts/FT Lumens/Watt AVG Input Watts/FT AVG Lumens/Watt Healthcare Lighting • (888) 834-5684 • www.healthcare-lighting.com © 2021 Acuity Brands Lighting, Inc. All Rights Reserved. “Healthcare Lighting” is a registered trademark of Acuity Brands Lighting. Products herein may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.

Type: Project: Single Function Recessed Linear Tunable White Luminaire A+ Capable options indicated by this color background. CATALOG NUMBER Example: HPL 2F 48LONG G 277 SYD TUWH RHYR 1300LMF NX SX NLT DARK 1C RIF MWAM Fixture Count Dynamic Feature Dynamic Range 120 120 volt 277 277 volt 347* 347 volt MVOLT** 120-277 Volt *Not available w/ E10WLCP **Not availbale w/ E10WLCP **Not available w/ 1300LMF Healthcare Patient Linear Single Fixture Dual Fixture Set 24" Nominal Length 36LONG 36" Nominal Length 48LONG 48" Nominal Length 72LONG** 72" Nominal Length 96LONG*** 96" Nominal Length *Not...

Type: Project: Single Function Recessed Linear Tunable White Luminaire SPECIFICATIONS Housing Extruded aluminum ceiling trim with cast aluminum endcaps and fabricated 18 gauge cold-rolled steel upper electronics channel housing. Lens Extruded 1/16" translucent opal acrylic snap-in lens profile sealed with closed cell silicone gasket along all four sides. Reflector Formed painted steel with gloss white powder coat; 95% reflectivity. Distribution Symmetric (SYD) with standard lens or 20° Asymmetric (ASD, ASDL, ASDR) distribution with standard lens and inner angled boards. Finish Painted in...

Type: Project: Single Function Recessed Linear Tunable White Luminaire PHOTOMETRICS Consult www.acuitybrands.com for photometry. Photometric data based on test results from an independent NIST traceable testing lab. IES data is available at www.healthcare-lighting.com. Always refer to our website for the latest IES file updates. AMBIENT with Asymmetrical Distribution Lumen Multiplier Table for CCT & CRI AMBIENT with Symmetrical Distribution Polar Candela Distribution Polar Candela Distribution This table can be used to approximate the lumen values at different kelvin temperatures. Data...

Type: Project: Single Function Recessed Linear Tunable White Luminaire CEILING TRIM F F (Flanged Sheetrock) (Flanged Sheetrock) GB GB (Flangeless Sheetrock Mud-In) (Flangeless Sheetrock Mud-In) MOUNTING Rough-In Dimensions F and GB Ceiling Trims *For more mounting information, please reference the installation instructions. SIZE 24LONG 36LONG 48LONG 72LONG 96LONG NLIGHT AIR ANTENNA IF EQUIPPED NLTAIR2 MODELS ONLY ACCESS PLATE ELECTRONICS CHANNEL GROUNDING POINT 2X 1/2" KO OCCURS ONE END ONLY .875 22 ADJUSTABLE GRID MOUNTING BRACKET 1.17 MIN 30 GRID MOUNTING BRACKETS ACCESS PLATE INCLUDES 2X...

Type: Project: Single Function Recessed Linear Tunable White Luminaire DIMENSIONS F NLIGHT AIR ANTENNA NLTAIR2 MODELS ONLY GROUNDING POINT 2X 1/2" KO OCCURS ONE END ONLY .875 22 INSTALLATION CLIPS RJ-45 JACK NLIGHT MODELS ONLY INSTALLATION CLIPS ACCESS PLATE INCLUDES 2X KO ELECTRONICS CHANNEL ACCESS PLATE HOUSING EXTRUSION LENS DIFFUSER LUMINOUS OPENING INSTALLATION CLIPS Trimless Mud-In RJ-45 JACK IF EQUIPPPED NLIGHT MODELS ONLY NLIGHT AIR ANTENNA IF EQUIPPED NLTAIR2 MODELS ONLY MOUNTING HOLES POSITION VARIES WITH MODEL LENGTH GROUNDING POINT 2X 1/2" TRADE SIZE KO .875 22 ACCESS PLATE...

Type: Project: Single Function Recessed Linear Tunable White Luminaire LED SCHEMATIC Schematic simplification of lighting options within luminaire, viewed in cross section, facing headwall. ASDL NX INTELLIGENT LUMINAIRE TECHNOLOGY GUIDE Choose Nomenclature from these columns Minimum Dimming Level Control Input Dimming Range eldoLED DUALdrive TUWH OPTION LOGARITHMIC DIMMING, NIO EZDCA CCT INTERNAL WALL POD Reference spec sheet for nPODMA for complete ordering nomenclature. NPS 80 EZ (purchase separately) nPODMA 2P DX CCT (purchase separately) nPODMA 2P DX CCT (purchase separately) Healthcare...

Type: Project: Single Function Recessed Linear Tunable White Luminaire NON-IC THERMAL PROTECTOR 2.00 51 LUMEN OUTPUT Note: BLANK refers to the option not used. E10WLCP option always Non-IC INSULATION DETECTOR ADDITIONAL DETECTOR NLT DETAILS NLT (Wired) Enabled Network RJ45 Jack Location Typical for all mounting styles (Grid mount shown for reference.) .58 15 RJ45 JACK TO NLIGHT NETWORK EMERGENCY E10WLCP Specific voltage designation required on fixture when ordering. When fixtures are ordered as a 2F (Dual Fixture Set) and E10WLCP, each fixture will be supplied with an integral battery...

Type: Project: Single Function Recessed Linear Tunable White Luminaire LAYOUT When specified as 2F (Dual Fixture Set) Diagram "Not to Scale" HPL 48LONG ASDL KNOCKOUTS TOWARD HEADWALL CEILING 12 FT 3.7 M 12.0-24.0 IN FROM HEADWALL 305-610mm (CENTERED ON BED) KNOCKOUTS OPPOSITE HEADWALL PATIENT BED FRONT VIEW Healthcare Lighting • (888) 834-5684 • www.healthcare-lighting.com © 2021 Acuity Brands Lighting, Inc. All Rights Reserved. “Healthcare Lighting” is a registered trademark of Acuity Brands Lighting. Products herein may be covered by one or more U.S. Patents and Patents Pending....