*mymedicalexpo

TRILUME

Product catalog summary

Intended Use
The Trilume lighting fixture is designed to provide glare- and shadow-free illumination with a visually comfortable aesthetic. It is suitable for patient rooms, corridors, and other general lighting areas within a facility. The fixture supports three lamps and two circuits for versatile tri-level light control, enhancing patient comfort. An optional low voltage controller allows light adjustments via a nurse call system or a separate pendant pillow switch.

Features

Direct and indirect lighting through an acrylic lens with a translucent insert.
Optional two-circuit design for multi-level light control.
Multiple lamping options available, including T8, T5, and T5HO.
Optional low voltage controller for patient control.
Sanitary lens option with concealed hinge for improved cleanliness.
Serviceable entirely from within the room.

Specifications

Mounting options: Grid (G) or Flange (F).
Voltage options: 120V, 277V, or multi-volt (120-277V).
Lens options: Acrylic Lens Basket (ALB) or Perforated Metal Basket (PMB).
Ambient lens insert options: Translucent Acrylic (TAI) or Perforated Acrylic Insert (PAI).
Switching options: No switch (SX), 1 Circuit (1C), or 2 Circuit (2C) for 2 or 3 level control.
Dimming options: Mark X or Mark VII dimming ballasts.
Additional options: Fast-Blo Fuse (GLR), Slow-Blo Fuse (GMF), LED Night Light (LNL), Sanitary Lens and Door (SL), 9 Watt Night Light (NLF).
Finish options: Gloss White (GW) or Anti-Microbial White (AM).

Ordering Information
Specifications are subject to change. An example order might be: HPT324 G 120 ALB TAI 2 T5 2C LNL AM.

Catalog excerpts

Intended Use The Trilume provides glare- and shadow-free illumination in a clean, visually comfortable aesthetic. Specify three lamps and 2 circuits to provide the patient with versatile tri-level light control for patient comfort. If a low voltage controller is included (optional), light levels can be conveniently adjusted via the nurse call system or using a separate pendant pillow switch (optional). This design is a complement to the Trilume with Exam fixture and is also suitable for corridors and for other areas of the facility where general lighting is needed. Features Direct and indirect lighting via acrylic lens with translucent acrylic insert PRODUCT INFORMATION 2 circuits (optional) allow multi-level light control Multiple lamping options available Low voltage controller (option) allows patient control from nurse call system Sanitary lens (option) with concealed hinge design improves cleanliness Entirely serviceable from within the room ORDERING INFORMATION Mounting Voltage Product Size G Grid HPT324 2x4 FT F Flange HPT322 2x2 FT ADDITIONAL INFORMATION Specifications subject to change. Basket lens Ambient lens insert ALB Acrylic Lens TAI Basket (Standard) PAI PMB Perforated Metal Basket WAV Translucent Acrylic Perforated Acrylic Insert Acrylic Wave Pattern Insert [Only available with ALB option] Ambient control Low Voltage 1C Controller 2C LVC with J-box, receptacle and Pillow Switch ADEZ with Cord No Switch 2 Circuit 2 or 3 level control Mark X Dimming ballast 5-100% phase control ADZT Mark VII Dimming ballast 0-10V low voltage dimmer GLR Fast-Blo Fuse GMF Slow-Blo Fuse LNL LED Night Light SL Sanitary Lens and Door NLF 9 Watt Night Light GW Gloss White (Standard) AM AntiMicrobial White For additional product information, visit www.healthcare-lighting.com. Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches unless otherwise noted. T8 standard with instant start ballast. TS standard with program start ballast. Consult factory for availability of 347V. If SL option, then PMB required. HEALTHCARE LIGHTING

Open the catalog to page 1

TRILUME

TRILUME

Catalog excerpts

All HEALTHCARE LIGHTING catalogs and technical brochures