Specifications Overview:
The SoundSleep BPAP ST25 Pro System (LC-BPAP-25T) is a versatile respiratory device offering multiple modes including CPAP, APAP, BPAP S, BPAP Auto S, BPAP T, and BPAP S/T. It operates within a pressure range of 4 to 25 cmH2O with a pressure accuracy of ± (0.5 hPa+4%). The device features a ramp time adjustable from 0 to 60 minutes in 5-minute increments and supports a starting ramp pressure from 4 cmH2O to CPAP/Auto Pressure or IPAP depending on the mode.

Performance and Features:
The device supports a respiratory rate of 5 to 40 BPM and a rise time between 100ms to 900ms. It offers adjustable inspiratory (I) and expiratory (E) sensitivity settings ranging from Very Low to Very High. Automatic leak and altitude compensation are included, along with humidification settings from 0 to 5.

Data and Connectivity:
Data storage is facilitated via an SD card and on-board memory, capable of storing over one year of data. The device is compatible with PC-based data analysis software.

Physical and Environmental Specifications:
The dimensions of the device are 14x15.6x9.4cm without the humidifier and 26.2x15.6x9.4cm with it. It weighs 950g without the humidifier and 1500g with it. The device operates on electrical requirements of 100-240 VAC, 50/60 Hz, 2.0-1.0 A, and maintains a noise level of less than 30 dB at 10 cmH2O.

Environmental Conditions:
Operating temperature ranges from 5° to 35°C, while storage temperature ranges from -20° to 60°C. It can operate in relative humidity conditions of 10 to 93% (non-condensing) and at altitudes from 0 to 2286 meters.

Risk and Compliance:
The device is classified as Class IIa, Type BF, IP22, indicating its compliance with medical safety standards.