Heimerle + Meule Group good as gold in i dental i jewellery {technique

Heimerle + Meule Group Solid gold Heimerle + Meule can look back on over 90 years of expertise in the development and manufacturing of precious metal dental alloys. Heimerle + Meule was founded as early as 1845. Forthree quarters of a century, the company's activities were devoted exclusively to the refining of precious metal from scrap and other precious-metal bearing waste products. Then the company seized the opportunity to extend its production range. The precious metal recovered during the refining process was alloyed in house, made into semi-finished products and supplied to the watchmaking...

PLATINOR®, AUROPLADENT®, ECONOR® and BEDRA DENT® There are many suppliers of dental alloys but only a few c p ­ om­ anies who can rely on the expertise of their own R & D and ­ roductions. Heimerle + Meule has been able to do this p for nearly a hundred years. Precious metal alloys of the highest quality The brand names PLATINOR®, AUROPLADENT®, ­ECONOR® and BEDRA DENT® stand for a range of products that covers all applications. The biocompatibility of Heimerle + Meule dental alloys is verified in close collaboration with independent research institutes. The following test procedures are used:...

PLATINOR®, AUROPLADENT®, ECONOR® Precious metal dental alloys Alloys Laser Colour wire* High-gold veneering alloys as per DIN EN ISO 22674 and 9693 PLATINOR® AM 97 dark yellow dark yellow dark yellow dark yellow dark yellow light yellow light yellow dark yellow Gold-reduced veneering alloys as per DIN EN ISO 22674 and 9693 PLATINOR® AM 4 Palladium based veneering alloys as per DIN EN ISO 22674 and 9693 ECONOR® AP 3 Universal alloys, veneerable as per DIN EN ISO 22674 and 9693 PLATINORM dark yellow dark yellow dark yellow dark yellow light yellow High-gold casting alloys as per DIN EN ISO 22674...

BEDRA DENT® Precious metal dental alloys Alloys Indication Laser wire Colour Ge dark yellow light yellow High-gold veneering alloys as per DIN EN ISO 22674 and 9693 BEDRA DENT® AL-3.4 BIO 86.5 10.4 light yellow Universal alloys as per DIN EN ISO 22674 and 9693 BEDRA DENT® UL-10 BIO 75.1 light yellow light yellow BEDRA DENT® UL-12 BIO 72.2 BEDRA DENT® UL-40 dark yellow dark yellow Casting alloys as per DIN EN ISO 22674 BEDRA DENT® GL-1 BIO 85.3 yellow yellow dark yellow yellow yellow light yellow Indications: 1 = Inlays, 2 = MOD-Inlays, Onlays, Crowns, 3 = Medium-sized bridges, 4 = Larger bridges,...

ecoNEM dental alloys ecoNEM classic, low-cost cobalt/chrome veneering alloy This affordable veneering alloy contains no nickel or beryllium and has an average CTE of 14.1μm/mK (20 - 600 °C) and can be veneered with classical ceramics such as INSPIRATION without the need for an oxide bake. Heimerle + Meule’s non-precious dental alloys meet the call for alloys available through the statutory health insurance scheme without the need for co-payment. Of course, these alloys are produced to the same high standards as precious metal dental alloys. ecoNEM nova, cobalt/chrome veneering alloy with molybdenum...

Veneering ceramic This new innovative new glass ceramic material makes the build-up even easier: opaque + body material + stain = brilliant, reproducible single crowns and bridges. INSPIRATIONeasy presents the easiest solution for veneering precious and non-precious metal frameworks with a CTE of 13.8 to 14.8 x 10-6 K-1 (25 – 500 °C). In terms of aesthetics and technical properties, this system leads directly to the required result. In this case, directly means: no opaque dentine, no dentine, no incisal, just a body ceramic. The same material is used from the cervical margin to the incisal edge...

Veneering ceramic The impressive features of the INSPIRATION veneering ceramic: INSPIRATION is a reliable and modern two-phase leucite glass ceramic with a maximum firing temperature of 900 °C. A perfect match of transparency and fluorescence enables natural teeth to be reconstructed in the form of porcelain fused to metal crown and bridge restorations using conventional veneering alloys with a CTE of 13.8 to 14.8 x 10-6K-1 (25 – 500 °C). Ideally suited to the PLATINOR® high-gold and gold-reduced veneering alloys and the ECONOR® palladium-based veneering alloys. INSPIRATION Starter Set Opaque...

The INSPIRATION system is ideally suited to the following Heimerle + Meule system alloys Precious metal alloys PLATINOR® AM 85/AM 86/AM 87/AM 77/AM G/AM 78/AM 3/AM 75 ECONOR® U 3 Non-precious alloys ® BEDRA DENT AL-3.6 BIO / AL-4 BIO / AL-5 / ÖKO-2 ecoNEM classic/ecoNEM nova Single packs Opaque Intense opaque Shoulder materials yellow orange amber orange- yellow- anthrapink orange cite molar white Opaque dentine white caramel salmon Effect incisals Opal Clear Yellow Yellow Brown Light blue Blue Grey Pink Neutral 094 Yelow Orange Light- Medium- Dark-Brown White Pink 107 Cervical transpa Black...

High-temperature press ceramic What was previously only possible with low-melting press ceramics and the ­relevant ­veneering ceramic (e.g. ­PLATINA®press with ­PLATINA®m) can now be achieved in the classical­ temperature range. ­INSPIRATIONpress is pres­ ed at an end temperas ture of 1080 °C. The work is ­ ayered or stained with l I ­ NSPIRATION, the modern leucite glass ceramic with a lower firing temperature. With INSPIRATIONpress, all-ceramic crowns, inlays and onlays can be made quickly, cost-effectively and with high precision. The high degree of fluorescence makes this press ceramic especially...

INSPIRATIONpress was s ­ pecially designed for v ­ eneering with the classical INSPIRATION ­veneering ceramic. Stain technique MT · Shade chart M3 – M6 · VITA® shade system Indications: inlays, onlays, veneers Press pellets MT/SO/ST Speed precision investment Glaze paste press Glaze liquid Shade chart for build-up technique · VITA® shade system ST (transparent build-up technique) SO (opaque build-up technique) INSPIRATION Glaze paste press middle-aged patients or a higher lustre during the glaze back, both for INSPIRATIONpress and F PLATINA®press. eige/transparent organic modelling wax that burns...