The smartest induction vacuum pressure casting machine ever HiCAST is completely different from all previous casting machines. The alloy melting process is based on a completely The alloy is melted and cast directly in a part of the casting ring. Separate melting crucibles are a thing of the past. Similarly, metal casting rings with ring liners to control the expansion of the investment material are dispensed with. This makes it incredibly easy to divest the casting. There is no need forthe melting crucible to be glazed, since the specially made crucible is divested together with With HiCAST, the casting process is quick and easy: - Remove the hot casting ring from the preheat furnace and insertthe alloy to be cast. - Place it on the platform of the melting chamber lift. - Press the Start button. - The casting ring travels up into the melting chamber. - After the hatch closes, the vacuum is created automatically and the melting process begins. - There is no need to increase the preheat temperature. - The correct moment for casting is determined by a visual inspection of the molten metal - Press the Casting button. Compressed air with a pressure of 6 bar forces the molten metal through a special sprue system into the casting ring. - The precision casting is ready. The lift travels down. This unique casting principle makes HiCAST delightfully neat The water cooling system uses a built-in tank, so that the only connections needed are AC mains power and a compressed air line with a pressure of 4 - 6 bar. HiCAST 90 HF induction vacuum pressure casting machine 7797 3 002 HiCAST 75 HF induction vacuum pressure casting machine 7797 3 001 Technical specifications Power supply Overload protection Safety valve Pump output Protective temperature of coolant Safety cut-out of coil time limit (automatic melting cut-out) Maximum number of casting processes (before a break of 1 hour) HiCAST 75 HiCAST 90 ■ Technical specifications 220/230 V Output power - adjustable during casting 50 Hz Operating frequency of the induction coil 3000 VA Time required to create vacuum (80 kPa) 11 bar Minimum alloy quantity 0,6l/min Maximum alloy quantity 60 C° Dimensions of the casting machine (h/w/d) Heimerle + Meule GmbH ■ Tel. +49 (0) 72 31 940-140 ■ www.heimerle-meule.com