UVC LED Module Hergy UVC LED module is design for air, static water and surface purification or disinfection. Input Length Width Height Weight Light sensor Duty cycle Default ( Automatically turn off when environment brighter than 10 lux ) Default ( 10 sec on / 50 sec off continuous cycle ) Feature > Compact size provide more possibility in equipment > Quartz glass reduce the loss of radiant flux > Narrow angle provide high radiant intensity to reduce operating time > Light sensor detect the ambient light to shut down for eye protection > Duty cycle provide sufficient radiant dose and longer lifetime > LED Indicator show the module operating for eye protection > IP65 protection provide more application in field LED indicator Default ( Light on while operating ) Socket Pigtail Protection Glass Installation Operating temperature M3 screw x 2pcs Depend on applications (*) (*) DO NOT operate continuously more than 2 minutes. Please set up suitable duty cycle for applications in field. Performance Data Spectral Power Distribution Radiant Flux Output Radiant flux values are from photometric tests performed at 25°C initial. Input Watts Radiant flux Peak wavelength Beam Angle http://www.hergy.com.tw TEL: +886-2-28911667 E-mail : [email protected] All rights reserved. Hergy Lighting reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication.