UVC-UL2
UVC-UL2
The document outlines the specifications for the Hergy UVC LED disinfection module. Key specifications include:
- Input Voltage: 24 Vdc
- Power Consumption: 100 W
- Radiant Flux: 4779 mW
- Wavelength Range: 265 ~ 278 nm
- Dimensions: Length 198 mm (7.80 in), Width 110 mm (4.33 in), Height 97 mm (3.82 in)
- Operating Temperature: -10 ~ +35°C (14 ~ 95°F)
- Installation Method: Recessed / Custom design
The performance data is based on initial conditions at 25°C. The module is designed to provide high irradiance for surface or air disinfection. It can be used with a simple harp/bracket or recessed in a fixture for various applications.
- Super high irradiance to reduce disinfection time
- Compact size for easy fixture integration
- Power-saving capabilities
- Forced convection system for enhanced reliability
The document includes irradiance simulation data at different heights:
- At Height 0mm: Maximum irradiance of 159 mW/cm²
- At Height 30mm: Maximum irradiance of 44 mW/cm²
Catalog excerpts
UVC LED disinfection module Hergy UVC LED disinfection module provides super high irradiance for surface or air disinfection, and it can use with simple harp/bracket or recessed in fixture for more application. Features Super high irradiance to reduce the disinfection time Compact size to fit into fixture Power saving Forced convection system for reliability Specifications Input Power consumption Radiant flux Operating temperature Installation method Recessed / Custom design Performance Data Values performed at initial 25°C and are representative of the configurations shown. Irradiance simulation (Height 0mm) Irradiance simulation (Height 30mm) http://www.hergy.com.tw TEL: +886-2-28911667 E-mail：[email protected] All rights reserved. Hergy reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication.
Open the catalog to page 1
