mB Quattro
17Pages

{{requestButtons}}

Catalog excerpts

mB Quattro - 1

flexiBle An even surface with 1540 x 1905 mm and a normal 230 V plug - the MB Quattro requires nothing more. Doesn‘t matter whether with a straight or ajacent exit: perfect accessibility can be created like this in no time at all - even in niches. safe The MB Quattro can optionally be equipped with a door at the upper station which increases the safety on the panels edge. By request also with an automatic door opener for maximum using comfort. Individual wishes? Contact us! Lift width: 1500 mm Stack height: 1372 mm lift type Useable platform dimension: 1100 x 1700 mm liftinG HeiGHt maximum lifting capacity Status 08/2018 – technical changes reserved HerKules liftwerK made in Germany Herkules liftwerk GmbH industriestraße 3 D-34260 Kaufungen Leben. Unabhän

Open the catalog to page 1
mB Quattro - 2

lift mB Quattro the smart ajacent exit solution with maximum lifting capacity. Four motor columns Waterproof sensor buttons with vandalism protection class IK08 and key lock witH little effort a Barrier-free access - even witH Heavy loaD. Controllable by radio or app via Bluetooth Straight or kg ajacent exit Whether inside or outside: The lift MB Quattro with its high grade materials and Automatic barrier its elegant robustness does not only make a good form, but also is absolutely uneffected by rain, snow, cold or heat when placed outside. Thanks to its high loading capacity of up to 500...

Open the catalog to page 2
mB Quattro - 3

Lift length Passage width Motor height Clearance height/Pit depth Attention! With normal installation (without pit) the ramp protrudes additional 30 cm from the lift. Pit width 1540 Lifting height 1700 mm Optional pit depth 90 mm The installation ground must be flat and horizontal. Surface load is max 4 kN/m² Power supply: 230 V/50Hz, 16 A Maximum power consumption 0,6 kW Lifting speed: approx. 2 cm/s Maximum gap width between the platform and the upper exit 20 mm Safety distances to other components (e.g.: Railings): > 100 mm In standard the lower entrance is on the short side (Passage...

Open the catalog to page 3
mB Quattro - 4

WENN NICHT ANDERS DEFINIERT: BEMASSUNGEN SIND IN MILLIMETER OBERFLACHENBESCHAFFENHEIT: TOLERANZEN: LINEAR: WINKEL: ENTGRATEN UNDSCHARFE KANTEN BRECHEN ZEICHNUNG NICHT SKALIEREN NAME GEZEICHNET Bartsch GEPRUFT GENEHMIGT PRODUKTION QUALITAT

Open the catalog to page 4
mB Quattro - 5

schwenkbereich Motorarm WENN NICHT ANDERS DEFINIERT: BEMASSUNGEN SIND IN MILLIMETER OBERFLACHENBESCHAFFENHEIT: TOLERANZEN: LINEAR: WINKEL: ENTGRATEN UNDSCHARFE KANTEN BRECHEN ZEICHNUNG NICHT SKALIEREN NAME gezeichnet Bartsch GEPRUFT GENEHMIGT PRODUKTION QUALITAT

Open the catalog to page 5
mB Quattro - 6

B ENTGRATEN UND SCHARFE KANTEN BRECHEN WENN NICHT ANDERS DEFINIERT: OBERFLÄCHENGÜTE: BEMASSUNGEN SIND IN MILLIMETER OBERFLÄCHENBESCHAFFENHEIT: TOLERANZEN: LINEAR: WINKEL: NAME Call button surface mounted with ke y ZEICHNUNG NICHT SKALIEREN GENEHMIGT PRODUKTION WERKSTOFF:

Open the catalog to page 6
mB Quattro - 7

B ENTGRATEN UND SCHARFE KANTEN BRECHEN WENN NICHT ANDERS DEFINIERT: OBERFLÄCHENGÜTE: BEMASSUNGEN SIND IN MILLIMETER OBERFLÄCHENBESCHAFFENHEIT: TOLERANZEN: LINEAR: WINKEL: NAME Call button flush mounted with key ZEICHNUNG NICHT SKALIEREN PRODUKTION WERKSTOFF:

Open the catalog to page 7
mB Quattro - 8

B ENTGRATEN UND SCHARFE KANTEN BRECHEN WENN NICHT ANDERS DEFINIERT: OBERFLÄCHENGÜTE: BEMASSUNGEN SIND IN MILLIMETER OBERFLÄCHENBESCHAFFENHEIT: TOLERANZEN: LINEAR: WINKEL: NAME Call button surface mounted without key ZEICHNUNG NICHT SKALIEREN GENEHMIGT PRODUKTION WERKSTOFF:

Open the catalog to page 8
mB Quattro - 10

WENN NICHT ANDERS DEFINIERT: BEMASSUNGEN SIND IN MILLIMETER OBERFLACHENBESCHAFFENHEIT: TOLERANZEN: LINEAR: WINKEL:

Open the catalog to page 10

All Herkules Liftwerk catalogs and technical brochures

  1. MB850

    19 Pages

  2. MB750

    18 Pages