- Catalogs
- Herkules Liftwerk
- MB1100, MB1400 & MB1700
MB1100, MB1400 & MB1700
MB1100, MB1400 & MB1700
Product Overview
The MB1100, MB1400, and MB1700 are flexible adjacent lifts designed and manufactured by Herkules Liftwerk GmbH in Germany. These lifts provide independent living solutions by enabling wheelchair accessibility with lifting heights up to 1700 mm (1790 mm with pit installation). They are suitable for overcoming up to nine or more steps, indoors or outdoors.
Key Specifications
- Lifting Heights: MB1100 - 1100 mm, MB1400 - 1400 mm, MB1700 - 1700 mm (up to 1790 mm with pit)
- Passage Width: 900 mm
- Lift Dimensions: Width 1280 mm, Length 1630 mm
- Clearance Height: 60 mm or 95 mm depending on ramp or surface level installation
- Loading Capacity: Up to 300 kg
- Lifting Speed: Approximately 20 mm/s
- Power Supply: 230 V / 50 Hz, 16 A with max power consumption 0.25 kW
Design and Construction
The lifts feature a high-quality stainless steel construction that is resistant to heat, frost, rain, and wind, making them suitable for outdoor use. The flat design allows installation directly on level ground or surface-leveled, minimizing space requirements. Optional pit installation is available for increased lifting height.
Installation and Dimensions
Installation requires a flat and horizontal ground surface with a maximum surface load of 4 kN/m². Concrete slabs for pit installations should be ferroconcrete, 150 mm thick (C20/25), with a strain capacity to support the lift weight plus additional load (approx. 350 kg). The lift is fixed to the ground using heavy-duty dowels.
Maximum gap between platform and upper exit is 20 mm, with safety clearances to other parts (e.g., railings) greater than 100 mm. Entrances are typically between the motors, but all sides can be used as access or exit points. Special orders allow up to three ramps.
Control and Safety Features
- Control options include handheld control, radio remote control, and smartphone app via Bluetooth.
- Waterproof sensor buttons with vandalism protection (IK08) and key lock are standard.
- Optional automatic doors at the upper station and automatic barriers at the lower station enhance safety.
- Fall protection is recommended at the upper station depending on lifting height and installation.
- CE conformity according to Machinery Directive 2006/42/EC.
Special Versions and Flexibility
The lifts can be installed with surface-level traffic-ability from up to three sites simultaneously, allowing near-invisible installation within traffic ways to maximize space usage. Adjacent exits are possible, with the lift able to turn to exit left or right, supported by a large turnaround area.
Additional Components
- Manual and automatic doors with detailed dimension sheets are available.
- Call buttons are offered in surface-mounted and flush-mounted versions, with or without keys.
- Connection plans and electrical wiring details are provided for installation.
Summary of Critical Parameters
| Parameter | MB1100 | MB1400 | MB1700 |
|---|---|---|---|
| Lifting Height (mm) | 1100 (1790 with pit) | 1400 (1790 with pit) | 1700 (1790 with pit) |
| Optional Pit Depth (mm) | 60 | 90 | 90 |
| Surface Load Max (kN/m²) | 4 | ||
| Power Supply | 230 V / 50 Hz, 16 A | ||
| Max Power Consumption (kW) | 0.25 | ||
| Loading Capacity (kg) | 300 | ||
| Lifting Speed (mm/s) | ~20 | ||
| Passage Width (mm) | 900 | ||
Best Practices and Recommendations
- Ensure installation ground is flat and horizontal.
- Install fall protection at the upper station based on lifting height and site conditions.
- Use recommended MB door for enhanced safety.
- Consider special versions for adjacent exits or multiple access points to optimize space.
- Follow provided electrical connection plans and safety clearances strictly.
Conclusion
The MB1100, MB1400, and MB1700 lifts by Herkules Liftwerk GmbH offer robust, flexible, and space-efficient solutions for wheelchair accessibility with customizable installation options, advanced control features, and compliance with safety standards. Their weather-resistant stainless steel design and multiple control methods make them suitable for diverse environments and user needs.
Catalog excerpts
specIaL VersIons We offer solutions perfectly fitting for your needs. With the surface level installation comes a trafficablility from up to three sites at the same time. Therefore the lift could be installed nearly invisible into the traffic way and creates more free space the maximum of using variety. adjacenT exIT On demand, an adjacent exit is also possible. The lift could be turned and the exit would be to the left or to the right - the large turn-around-area makes it possible. Individual wishes? Contact us! LIFT TYpe LIFTInG HeIGHT Clearance height: 60/95 mm Lifting height: up to 1700*/1790 mm Lift length: 1630 mm Revision 09/2018 - Subject to technical changes the flexible adjacent lifts HerKuLes LIFTwerK made in Germany Herkules Liftwerk GmbH Industriestraße 3 34260 Kaufungen Tel 0561 9539970 Fax 0561 95399799 www.liftwerk.de Leben. Unabhängig. Leben. Unabhängig.
Open the catalog to page 1
lift mB1100, mB1400 & mB1700 adjacent exit with up to 1790 mm lifting height Waterproof sensor buttons with vandalism portection class IK08 and A lock key Controllable by radio or app via Bluetooth Straight or kg adjacent exit uncounTaBLe VersIons on THe sMaLLesT space The maximum lifting heights of the MB1100, MB1400 and MB1700 overcome up to nine or more steps in or outside the house. Thanks to their flat designed systems, the three versions with different lifting heights could be placed directly on the level ground, if required also surface leveled. The high-quality stainless steel construction...
Open the catalog to page 2
Clearance height 1274 Lift - Dimension Lifting height 1100 mm Optional pit depth 60 mm The installation ground has to be flat and horizontal. Surface load is max 4 kN/m² Power supply: 230 V/50Hz, 16 A Maximum power consumption 0,25 kW Lifting speed: approx. 20 mm/s Maximum gap width between the platform and the upper exit: 20 mm Safety clearances to other parts (e .g. railings): > 100 mm Lift Dimension In standard, the entrance is between the motors. All sides are usable as an access/exit. (Special orders with up to 3 ramps are possible) Depending on the actual lifting height and the installation...
Open the catalog to page 3
When installed in a pit, a drain can be placed in the middle. Bottom plate flat, without sloping. Ferroconcrete 150 mm thick C20/25, graining 0/16 Ground level (alternatively 60 mm sunk for ground level installation of the lift) Substruction by choice, depending on the subfont Strain of concrete slab approx. 380 kg weight of the lift, max. 350 kg additional load IF NOT DEFINED OTHERWAYS: DIMENSIONING IN MILLIMETRE SURFACE CONDITION: MARGINS. LINEAR: ANGLE: SURFACE QUALITY: TRIMMING AND REMOVING SHARP EDGES Lift will be fixed on the ground with heavy - duty dowels Dimension and info sheet for...
Open the catalog to page 4
Lift Dimension Clearance height Lifting height 1400 mm Optional pit depth 90 mm The installation ground must be flat and horizontal. Surface load is max 4 kN/m² Power supply: 230 V/50Hz, 16 A Maximum power consumption 0,25 kW Lifting speed: approx. 20 mm/s Maximum gap width between the platform and the upper exit: 20 mm Safety distances to other parts (e. g. railings): > 100 mm In standard, the entrance is between the motors. All sides are usable as an access/exit. (Special orders with up to 3 ramps are possible) Depending on the actual lifting height and the installation situation, a fall protection...
Open the catalog to page 5
When installed in a pit, a drain can be places in the middle. Bottom plate flat, without sloping. Ferroconcrete 150 mm thick C20/25, graining 0/16 Ground level (alternatively 90 mm sunk for ground level installation of the lift) Substruction by choice, depending on the subfont Strain of concrete slab approx. 400 kg weight of the lift, max. 350 kg additional load IIF NOT DEFINED OTHERWAYS: DIMENSIONING IN MILLIMETRE SURFACE CONDITION: MARGINS: LINEAR: ANGLE: SURFACE QUALITY: TRIMMING AND REMOVING SHARP EDGES Lift will be fixed on the ground with heavy - duty dowels Dimension and info sheet for...
Open the catalog to page 6
Lift Dimension Lift Dimension Clearance height Lifting height 1700 mm Optional pit depth 90 mm The installation ground has to be flat and horizontal. Surface load is max 4 kN/m² Power supply: 230 V/50Hz, 16 A Maximum power consumption 0,25 kW Lifting speed: approx.. 20 mm/s Maximum gap width between the platform and the upper exit: 20 mm Safety clearances to other parts (e. g. railings): > 100 mm In standard, the entrance is between the motors. All sides are usable as an access/exit. (Special orders with up to 3 ramps are possible) Depending on the actual lifting height and the installation situation,...
Open the catalog to page 7
When installed in a pit, a drain can be placed in the middle. Bottom plate flat, without sloping. Ferroconcrete 150 mm thick C20/25, graining 0/16 Ground level (alternatively 90 mm sunk for ground level installation of the lift) Substruction by choice, depending on the subfont Strain of concrete slab approx. 450 kg weight of the lift, max. 350 kg additional load IF NOT DEFINED OTHERWAYS: DIMENSIONING IN MILLIMETRE SURFACE CONDITION: MARGINS: LINEAR: ANGLE: SURFACE QUALITY: TRIMMING AND REMOVING SHARP EDGES Lift will be fixed on the ground with heavy - duty dowels Dimension and info sheet for...
Open the catalog to page 8
F Central connection point on ground Lift Control-section "down" MB-Door without motor DIN-left (The connection gets mirrored with DIN-R) MB-Door with motor DIN-left (The connection gets mirrored with DIN-R) Central connection point on ground Attention: Picture can differ from the original Herkules Liftwerk GmbH Industriestraße 3 34260 Kaufungen Tel : +49 561 953997-0 EMail: [email protected] WENN NICHT ANDERS DEFINIERT: BEMASSUNGEN IN MILLIMETER OBERFLÄCHE : DIN ISO 1302 TOLERANZEN : DIN 2768-1 m STANZEN : DIN 6930 g KALTBIEGEN : DIN 6935 Werstückkanten nach DIN 6784 Aussen: - 0,5 Innen : + 0,5...
Open the catalog to page 9
WENN NICHT ANDERS DEFINIERT: BEMASSUNGEN SIND IN MILLIMETER OBERFLACHENBESCHAFFENHEIT: TOLERANZEN: LINEAR: WINKEL: ENTGRATEN UNDSCHARFE KANTEN BRECHEN GENEHMIGT PRODUKTION QUALITAT
Open the catalog to page 10
zing range motor arm WENN NICHT ANDERS DEFINIERT: BEMASSUNGEN SIND IN MILLIMETER OBERFLACHENBESCHAFFENHEIT: TOLERANZEN: LINEAR: WINKEL: ENTGRATEN UNDSCHARFE KANTEN BRECHEN ZEICHNUNG NICHT SKALIEREN NAME gezeichnet Bartsch GEPRUFT GENEHMIGT PRODUKTION QUALITAT
Open the catalog to page 11All Herkules Liftwerk catalogs and technical brochures
lift MB1000 & MB130021 Pages
mB Quattro17 Pages
MB85019 Pages
MB75018 Pages