Bubble humidifier / Aerosol atomizer Description of Functions Bubble humidifier The gas flows through the immersion tube to the bottom and then bubbles out from many nozzles at the end of the tube and flows back through the water to the top. This has the effect that the gas is enriched with humidity. Aerosol atomizer The gas flows through the atomizing nozzle, which is located above the water level, and produces a suction effect. Due to this suction in the lower drilling of the atomizing nozzle, the water is sucked in via the silicone hose and is atomized in the nozzle into aerosol. Maintenance and Care Please note: Before the first use of the release system and whenever deemed necessary from the hygienic or medical point of view, one of the following measures for cleaning and care has to be carried out. Disassembling For disinfection, cleaning or sterilisation purposes, screw off the bottle of the humidifier and empty it. Disinfection and cleaning Manual disinfection and cleaning All those parts which get into contact with the patients’ breathing air have to be disinfected in any case. • Put the corresponding application elements into the disinfecting bath; the exposure time will depend on the type of disinfecting agent which is used (see the package insert of the disinfectant). • Take the elements out of the disinfecting bath and rinse them with running sterile water. • Dry the cleaned elements. Please make sure that there is no humidity left in the flowmeter. • For those parts which do not get into contact with the patients’ breathing air wiping disinfection will be sufficient. Mechanical disinfection and cleaning Please make sure that you only use non-aggressive detergents, for example „neo disher MA“, „neo disher FA“ or similar products. Sterilisation The bottles of the humidifier can be autoclaved at a temperature of 134°C. Disposable application elements must not be autoclaved (see order data).

Bubble humidifier / Aerosol atomizer Aerosol atomizer 6600164 Bubble humidifier 6600142 230 x 70 x 100 mm 400 g Article No. HxWxD Weight Upper part Supply bottle Aerosol atomizer 6600164 245 x70 x 90 mm 450 g Anodised aluminium PSU, autoclavable Scaling 250 ml Nozzle holder Spare jar 250 ml Sealing ring Ø 65 x Ø 57 x 4 mm Bubbling nozzle Nozzle for aerosol atomizer with nozzle hose Extension for bubbling nozzle For more detailed information on our products please refer to www.heyer-aerotech.de Here you will also find all the instructions for use as a download. You can also contact us directly,...