Hill-Rom® Prima® Xtend Fixed Arm Double Fixed Arm with 1025 OR Service Head Smooth Movement The Prima® Xtend fixed arm has high quality bearings, that make it easy and comfortable for one person to move the arm around. Featuring an amazingly low Effort-toLoad Ratio of 1 to 83 lbs., even a heavily-loaded Prima® Xtend arm virtually “glides” from position to position. The clean design of the Prima® Xtend arm replaces screws and hard-to-reach joints with fluid lines and smooth surfaces making cleaning easy, quick and efficient. Turnaround time is minimized. Super Tight Pneumatic Brakes The positive pneumatic braking system locks each joint with force so the arm stays where you place it. The brake release buttons are conveniently located on the front of the head. Complementary friction brakes, featuring car technology pads, come standard and allow you to adjust the rotation of each joint if desired. Generous Service Capacity Because of an oversize throat design, multiple head configurations provide a generous amount of services. Up to 12 gases, 18 duplex and 6 low voltage provisions (including 1 telephone line and 1 data line) can be installed on the 1025 OR Service Head.

Hill-Rom® Prima® Xtend Fixed Arm Reach and Payload The 1025 OR Service Head allows for a height of at least 36" of equipment to be stacked on its shelves. The equipment payload capacity ranges from 213 lbs. for the 79" double fixed to 411 lbs. for the 55" double fixed, and 697 lbs. for the 39.5" single fixed. Maintenance A once-a-year check is recommended. Both pneumatic and friction brake systems can be changed very easily in minutes without disassembling the whole arm. Single Fixed Arm Reach 39.5" (1000mm) Accessories • Shelf • Drawer • Keyboard Tray • Set of IV Poles • Flat Screen Monitor...