The DFB range of grossing stations provides the opportunity to customise a grossing station to fit specific needs for every laboratory. Our grossing stations are manufactured from one sheet of stainless steel, thereby allowing complete and seamless decontamination. It is equipped with dual-draft ventilation and a frontal air curtain (patent pending) which does not allow the fumes to go out of the station, ensuring more safety of the operator.

H-CH=0 (ppm) - Fehling’s test (identifying aldehyde and ketone functional groups) THE ONLY GROSSING STATION WITH A CERTIFICATION FOR FUMES CONTAINMENT OBTAINED FROM AN ACCREDITED BODY. Fehling’s Test and trend of airborne formaldehyde concentration: The graph shows the peak of emission from the tank with 38% formalin, detected with a probe placed on the worktop; once the exhaust system of the DFB Range Grossing Stations has started, the formaldehyde values fall to the safe levels (below 0.3 ppm) within a few seconds, and this is indicative of the workstation's formaldehyde containment capacity...

AUTOPSY SINK | The autopsy sink is central approach with leg frame built completely in stainless steel AISI 304 / AISI 316. Supplied with several accessories as per customer requirements. It can be used in conjunction with our carts. SCRUB SINK | The wall-mounted scrub sink, in stainless steel AISI 304 / AISI 316 . Different sizes available BODY CARRIER | The body carriers are designed to assist body convey by reducing the operator’s back strain, and by providing a tactful movement of the corpse. The cadaver carrier is easy to steer and the profile perimeter allows a controlled fluid retention....

| COVERED BODY CARRIER The covered body carrier is designed to assist the body convey by reducing the operator’s back strain, and by providing an ease steering and a tactful movement of the corpse, ensuring privacy thanks to its upper cover. | AUTOPSY TABLE The design of our tables has been tested to guarantee a tailor-made experience, in order to adapt to customer requests. The tables are manufactured in stainless-steel AISI 304 / AISI 316 contains the ducts of the ventilation system, in order to extract toxic fumes during processing. Different models and sizes are available.

CADAVER LIFT The electrically or manually operated cadaver lift is manufactured in stainless steel AISI 304 / AISI 316. It is designed to facilitate vertical loading and unloading within a morgue. Height adjustment is provided by an integrated hydraulic unit, electrically operated, with a 12 volt battery that ensures constant power supply, using a dedicated hand controller. Integrated digital scale can also be provided. | MORGUE REFRIGERATION The cold-rooms have a 80mm or 100mm thick wall. Floor and ceiling panels manufactured from fire retardant high density HCFC free, polyurethane foam sandwiched...

| EQUIPMENT FOR ANATOMY LABS IN MEDICAL UNIVERSITIES The video routing system allows communication in audio video conferencing, and for the exchange of clinical and multimedia data with the hospital or university information system. The system includes teacher stations and student tables. It also manages all video signals of the student workstations and transmits them to the teacher's workstations, who can then view them simultaneously on the split view monitor. It is possible to perform pan, tilt and zoom movements on the student's camera. All video signals can be recorded (up to a resolution...

| VENTILATED CABINET Ventilated cabinets with sliding or hinged doors, for the storage of samples with Glass or Steel doors. The necropsy table in AISI 304 / AISI 316 stainless steel is designed for the necropsy of large animals, equipped with a hydraulic scissor lift and pump unit or fixed on legs. Available with or without wheels, rectangular or kidney-shaped, fixed or elevating. Possibility to integrate an easy handling tractor. AddressHIPLAAS SRLVia Serra Bagnara SNC, Area Industriale, 83030, Montefusco, Avellino, ItalyPhone Online+39 0825 963263 [email protected]