HIPPENDOSKOP SERVICE GMBH » your requirements are our aims. » HIT - High Illumination Technology the first REAL SYSTEM SOLUTION for fibre-light-guides

■ the first System solution for fibre-light-guides through full compatibility with all device types [xenon- & halogen light source] ■ no burn of cable ends through too high temperatures at the light entry side [especialiy by xenon light sources] ■ full compalibilily to all leading manufaturers of optic- & light sources ■ autodavable till 134°C/273°F & chemical and thetmal desinfection are possible transmission increase of appr. 20% till max. 50%

Medical fibre-light-guides serve the flexible ligfl Transmission between light sources and endoscopes. Hospitals usually have got light sources and endoscopes from different manufacturers in us® With our HIT - fibre-light-guides it is possible to connect light sources and endoscopes from different manufacturers without any problems. Example: Through the use of a Storz adapter on the light entry side and a Wolf adapter on the endoscope side you are able to connect in a very simple and fast way a light source of Karl Storz with an endoscope from Wolf. A conventional fibre-light-cable is made of...

A core glass rod with a high refractive index is surrounded by a glass tube with a lower refractive index and softened in a ring kiln at around 1000 °C and then drawn into threads with a diameter of 70 |jm. The combination of the two different types of glass means that light can be passed through the fibres using the principle of total reflection. Around 3800 of these light conductors are wrapped in a protective sleeve - made of a spiral of round stainless steel wire, a glass silk mesh hose and a highly robust plastic fibre with a silicon hose - and a holder sleeve and the light inlet and outlet...

In our tried and testet HIT - fibre-light-guides, a special patented system involving melting and pressing is used instead of gluing. This means there are no glue joins between the individual fibres which could burn at high temperatures. This means our HIT - fibre-light-guides are resistant fo the influence of temperature from high Performance xenon light sources. Relative to area, melted fibre-light-guides have 20 % greater transmission no Space is taken up by glue. Instead of the glue, there is an arrangement of perfectly tessellating hexagonal fibres. Xenon light sources often have collective...

available diameters of fibre-iight-guides 3,5mm & 4,8 mm [more diameters on request!] We recommend for example for the: Athroscopy, Urology, Sinuscopy our program of HIT - fibre-iight-guides with a diameter of 3,5mm! We recommend for example for the: Laparoscopy our program of HIT - fibre-iight-guides with a diameter of 3,5mm! compatible types of endoscopes: all on the market available types [related to the state of the art] Our whole program of HIT - fibre-iight-guides [dia. 3,5 mm & 4,8 mm] is compatible via our adapter system with all types of endoscopes [dia. 4 mm & 10 mm]. In case of proper...

silicone lube fibre light waveguides

» adapter system [light source side] 14-0065-00 ACMI, British 13-1035-00 Olympus 13-1036-00 Wolf 13-1034-00 Storz our adapter is compatible with all following brands: Storz Wolf Olympus ACMI, British Fuji Heine MGB Olympus Spezial Olympus, ACM Pentax Schott Volpi Winter On request we offer you adapters of other manufacturers

description article number description article number More lenghls, diameters & special designs on request.

description article number description article number More lenghls, diameters & special designs on request.

h an eventually needed lock i lenght of the handhold light entry side j cable lenght between handhold pieces k cable lenght from end to end I handhold lenght light exit side . m lenght of the connector light exit side Further Detoils _________________________

Fibre light guides are used to transport light between different cold light sources and endoscopes designed for medical purposes. Glued light cobles con be connected to all cold light sources with halogen reflector lamps. Xenon light sources should be operated with fused light cables. By the use of HIT - fibre-light-guides attend to the following informations: ■ Even though they are extremely flexible, the universal light cables are very robustly built ■ However, extended Service life can only be guaranteed if the following instructions are followed: ■ do not kink the light cobles or bend them...

In July 1996, Hipp Endoskop Service GmbH was founded by Alexander and Frank Hipp. The two brothers are highly experienced in the field of endoscopy. Prior to the incorporation of the Company, their work was focused on the development and repair of endoscopes of all kinds and makes. Thanks to their own as well as their employees' strong personal commitment, their know-how, creativity, team spirit and the family enterprise's consistency, top quality products may be granted. As the Services offered have been adjusted to meet the markets needs and demands and all products are absolutely compatible with...

Hipp Endoskop Service GmbH Glottertalstrasse 10 D-79108 Freiburg Fon: +49.(0)761 /52800 Fax:+49.(0)761 /52855 E-Mail: [email protected] Internet: [email protected] This booklet remains exclusive property of Hipp Endoskop Service GmbH. Reprinting - even porticulary - is not allowed. Technical alterations and printing errors reserved.