TEC 2900-4 Thermal Console Double Floor
1Pages

Technical Data Function and characteristic: This Motorized drive. Model MCconsole is composed of aThermal Consoleencapsulated Microtome, is used for rapid new “triple purpose” TEC 2900-4 compressor cooled work surface held TheCompatible Embedding Material paraffin, plastic.can be used independently from the rest of the Cryo 5050 Semi-automatic Cryostat with fully control unit pathological sections of will on and animal tissues. It left side freezing of of inclusion and placed atUsed inthe right side or the TEC can be widely used for pathological to chill the paraffin blocks rapidly. human combinationby the controlof Embedding center. 2900-1 The cutting and trimming function can be finished with system. Is equipped with two and research in hospitals, medical colleges, and legal medical institutes. upper chamber diagnosis, analysis chambers: the standalone unitis allocated a removable tub to put cassettes or mold. Dispensing console as well as a at any position, so as to ensure the safety of the operation. near microtome station. The hand wheel usedbe locked design features rounded their individualeasy-to-use joystick. can to maintain the tissue specimens in corners and cassettes at the proper The lower chamber is Ergonomic, attractive and laboratory. The large Teflon coated refrigerate modern Best fits large waste tray embedding. The the needs of the temperature working height. Convenient while awaiting can be Exchanged arbitrarily. surface can hold the specimen Two kinds control 80 standard cassettes, is equipped with anti-drip All temperaturesof up to andgives clamp can be changed conveniently, and it has the alarm system. programmingstatus in a glance. is The touch-screen displaycoolingall unit gasset and monitored by the front keyboard. edge. It has a system of cycle compressed, CFC-free. Two model for section: Manual and automatic, the user can switch arbitrarily. UVC disinfection Plexiglas cover to keep the risks by infectious material.to to minimize contamination temperature constant and It equipped withof section: 25 circle/minute, 35 circle/minute, 45 circle/minute, 55 circle/minute. Four speed avoid the formation of ice on the surface intrimming. Switch arbitrarily between section and high humidity ambient. Alarm system for horizontal and vertical stock limit, protection system for motor surcharge. Technical Specifications: Cut thickness range: 0,25 100 μm Range Microtome: of the thickness- of slice: 0～100µm Cryostat -- Nominal supply voltage:220V/50 Hz or 110V/60 V/60 HzRefrigerating capacity: 690 W Trim thickness voltage: 220 V/50 Nominal supply range: 10-100 μm Section thickness range: - 600 μm Hz or 110 Hz Range of the thickness ofV/A trimming: 0～100µm Cut thickness adjustment: -Adjustable Increment: 600 V/A - Maximum power draw: 200 Maximum power draw: Chamber temperature: -10°C ~ -35°C Adjustable Setting 0,25 to 2,5 μm in 0,25 slice ranges: -Value Move thickness ofμm increments; 75°C increments 1°C. 1°C. shelf temperature: -45°C - Working temperature: from ambient to to -20°C increments Working temperature: from ambient value/step increments; Freezing 0,5 to 2 μm in0～10µm increment 0,5µm 0,5 μm 0 μm – 10 μm 1 μm increments; Number of freezing station: 20 2 to 10 μm in 1 μm Dimensions: in 2 μm Dimensions: 10～20µm increment 2µm 10 μm to20 μm 2 μm increments; 10 – 20 μm Peltier number: 2 Width: 41 μm μm Width: 50 cm 20～100µm increment 5µm 20 – 100 20 μm to41 μm 5in 5 μm increments Refrigerant: R404a, 300g±10g Trim 63 Depth: 63 μm 10 μm 50 μm – 100cm specimen stroke:10 μm in 1 μm Depth: thickness adjustment: 1 to 26mm Compressor oil: 0.6L EMKARATE RL-22S, ICI Horizontal increments; Height: thickness range: 0~500 μm Trimming44 cm Height: 44 cm Vertical specimen stroke: 60mm 1 to 10 μm in Weight: 24kg 1 μm increments; kg Adjustable9Increment: Size and weight Weight:retraction μm the specimen clamp: 20µm The 10 to 20 μm in 2 of increments; Value Move value/step increments; Width: 780 mm (650 mm without hand wheel) 50 to 100 μm in 10 μm Orientation of specimen head: 360° 0 μm – 20 600 2 μm theμm increments; Thickness: 700 mm 100 to μm μm in 50 Minimum 5 μm 20 μm – 50 μmsetting thickness of slice: 0,5µm Specimen retraction: 20 μm Height: 1152 mm Maximum 10 μm Object feed:section of slice: 50×50mm 50 μm – 100 μm26 mm ± 1 mm, feed motion via step Net weight: 145 kgs Slice 500 μm 50 μm 100 motor precision: ±10% μm – Gross weight: 190 kgs Vertical stroke: 52 20 Specimen retraction: mmμm Max. specimen size (LxHxW): 50 x 60 x 40 mm Horizontal stroke: 25 mm Max. sectioning area w/o retraction: 65 mm Vertical stroke: 59 mm (without specimen orientation) Specimen’s max size: 55 mm X 55 mm mm Max. sectioning area with retraction: 60 Specimen orientation: 12°(X,Y,Z three directions) Histo-Line Laboratories S.r.l. – Viale Giuseppe di Vittorio, 30 - 20090 Pantigliate (MI)Email:Tel. 02.55.23.00.61 r.a.- Fax 02.55.21.37.64 Via Brembo, 27 - Milano Italy Tel: +39 0255230061 Fax: +39 0255213764 - Italy histoline@histoline.com URL: www.histoline.com Histo-Line Laboratories S.r.l. – Viale Giuseppe di 30 - 20090 20090 Pantigliate (MI) - Tel. 02.55.23.00.61 r.a.- Fax 02.55.21.37.64 Histo-Line Laboratories S.r.l. – Viale Giuseppe di Vittorio,Vittorio, 30 - Pantigliate (MI) - Italy Tel. 02.55.23.00.61 r.a.- Fax 02.55.21.37.64 Italy E-mail: histoline@histoline.com - Internet: http://www.histoline.com E-mail: E-mail: histoline@histoline.com - Internet: http://www.histoline.com histoline@histoline.com - Internet: http://www.histoline.com ARM 3600 Fully Motorized and Programmable