ArBlade 5000 / IM5000-CTC | High-performance Ar+ ion polisher

Product catalog summary

Introduction
The ArBlade 5000 and IM5000-CTC are advanced systems designed for SEM sample preparation, particularly when high-quality, millimetre-scale cross-sections or surfaces are required. These systems are ideal alternatives to FIB technology, offering precise and undisturbed cross-sections across various materials, including heat-sensitive ones.

Specifications
The systems feature a robust Penning type ion gun with independent control of beam current and acceleration voltage, allowing for intensive ion beams at voltages ranging from 0-8kV. Cross-section widths can be adjusted from 1mm to 10mm, with a process depth in silicon reaching 1000µm per hour. Surface polishing can be performed at tilt angles from 0° to 90°.

Procedures
Cross-section preparation involves sharp, precisely positionable sections in millimetre widths. Surface polishing, or flatmilling, allows for post-processing of mechanically pre-polished surfaces, achieving effects like surface smoothing and relief generation. The systems support cryogenic processing with temperatures down to -100°C.

Optional Accessories
Available accessories include flat milling equipment for larger specimens, multiple cross-section holders, advanced control software, and a special cryo cross-section holder. The advanced control software enables the creation of custom work sequences.

Product Features
The ArBlade 5000 extends the capabilities of the IM4000 II series, offering cross-section widths up to 10mm and a powerful ion gun with a removal rate of over 1mm per hour. The system supports automatic processing of multiple samples and features an inert gas transfer function for air protection.

Recommendations
For users unsure of which product best suits their needs, consultation with an expert is recommended. Additional information and support are available through Hitachi High-Tech's website and contact email.

Legal and Contact Information
This document is the copyright of Hitachi High-Tech Europe GmbH and is intended for general information purposes. The company reserves the right to alter specifications without notice. For more information, visit the website or contact via email.

Catalog excerpts

ArBlade 5000 / IM5000-CTC | High-performance Ar+ ion polisher-1

Sample Preparation and Cross-Section Preparation

Open the catalog to page 1

ArBlade 5000 / IM5000-CTC | High-performance Ar+ ion polisher-2

Argon ion Polishing Systems of the IM Series Energy systems Polymer fuel cell Ceramic fuel cell (La-Ce/NiO) CIGS solar cell Boron nitride Zinc coating on steel Carbon fibre reinforced plastic The clever alternative to FIB technology The IM series systems are indispensable for SEM sample preparation. They are ideal for when high-quality, millimetre-scale cross-sections or surfaces are needed and conventional mechanical preparation methods don’t give satisfactory results. The two systems IM4000 II and ArBlade 5000 are presented on the following pages. Cross-section preparation Surface polishing...

Open the catalog to page 2

ArBlade 5000 / IM5000-CTC | High-performance Ar+ ion polisher-3

ArBlade 5000 / IM5000-CTC High-performance Ar+ ion polisher Product Features - Single, robust and maintenance-friendly Penning type ion gun with independent control of beam current and acceleration voltage. Allows intensive ion beams at all acceleration voltages (0-8kV) - Cross-section widths can be flexibly selected by periodically moving the sample relative to the ion beam from 1mm to 10mm wide Variable width cross-section due to lateral movement of the sample All extensions and additions from IM4000 are available. Plus exclusive IM5000 / IM5000 CTC additions: - Cross-sectional process depth...

Open the catalog to page 3

ArBlade 5000 / IM5000-CTC | High-performance Ar+ ion polisher-4

Not sure which product aligns with your needs? Our experts are here to provide guidance and help you make the best choice. Speak with an expert More information This publication is the copyright of Hitachi High-Tech Europe GmbH and provides outline information only, which (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or regarded as the representation relating to the products or services concerned. The content is provided for general information purposes only. Hitachi High-Tech Europe GmbH’s policy is one...

Open the catalog to page 4

All Hitachi High-Tech Europe GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list