Introduction
The ArBlade 5000 and IM5000-CTC are advanced systems designed for SEM sample preparation, particularly when high-quality, millimetre-scale cross-sections or surfaces are required. These systems are ideal alternatives to conventional mechanical preparation methods and FIB technology.

Argon Ion Polishing Systems
The IM Series offers precise cross-section preparation and surface polishing. It can handle a variety of materials, including heat-sensitive polymers, with an optional cryogenic version available. The systems accommodate samples up to 8mm in height and 50mm in diameter.

Cross-Section Preparation
The systems provide sharp, mechanically undisturbed cross-sections up to 10mm wide. They are suitable for a wide range of materials, including metals, organics, semiconductors, and energy systems.

Surface Polishing
Surface polishing is achieved through flat milling, allowing for surface smoothing, cleaning, and relief generation. The angle of incidence of the ion beam can be freely selected to achieve various effects.

Product Features
- Single, robust Penning type ion gun with independent control of beam current and acceleration voltage.
- Flexible cross-section widths from 1mm to 10mm.
- High removal rate of over 1mm per hour.
- Surface polishing at tilt angles from 0° to 90°.

Optional Accessories
- Flat milling equipment for larger specimens.
- Multiple cross-section holders for up to 3 samples.
- Advanced Control Software for extended functionality.
- Inert gas transfer function for air protection.
- Special cryo cross-section holder for fast and accurate processes.

Advanced Control Software
The software allows for the creation of custom work sequences and supports multiple cross-section positions.

Additional Features
- Extended traverse path for sequential processing of multiple samples.
- Positioning microscope for clamp holders.

Contact Information
For more information, visit the Hitachi High-Tech website or contact their experts via email.

Disclaimer
This document is the copyright of Hitachi High-Tech Europe GmbH and is intended for general information purposes only. Specifications and designs are subject to change without notice.