Micro annular gear pump mzr-7208
2Pages

{{requestButtons}}

Catalog excerpts

Micro annular gear pump mzr-7208 - 1

High performance series Micro annular gear pump mzr®-7208 For industrial production and process technology High dosage precision precision CV < 1% at low volumes High differential pressures achievable even for low viscosity liquids Long service life wear-resistant tungsten carbide Broad viscosity range methanol, water, solvents, adhesives, grease, gel Compact dimensions length 211 mm Dynamic precision motor brushless DC-motor with encoder Low pulsation delivery, low shear stress rotary micro annular gear technology The micro annular gear pump mzr-7208 covers the flow rate range 0.048-288 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of nonlubricating liquids or at high pressures. Driven by a high-power DC-servomotor the pump allows dosage in a broad viscosity range and shows small, economic dimensions. The mzr-7208 targets applications in industrial production and process technology. The pump has been designed for continuous delivery and discrete dosage of water, watery solutions, solvents, methanol, oil, lubricants, adhesives, inks and paints as well as other high viscosity liquids. Applications - Chemical processing - Industrial and plant engineering - Packaging - Medical and pharmaceutical industry - Mini plant technology - Spraying - Dispensing of adhesives - Ink and paint dosage - Vacuum applications Even if single parameters are within the indicated performance range of technical data, certain parameter combinations may not be achievable. Single parameters may exceed their indicated performance range under adequate circumstances. For detailed evaluation please contact HNP Mikrosysteme. Actual performance may vary. Specifications are subject to change without notice. Technical data Flow rate 0.048 - 288 ml/min Smallest dosage volume 30 pl Differential pressure range 0 - 30 bar (1 mPas); 0 - 150 bar (> 16 mPas) Max. inlet pressure 5 bar (73 psi); 10 bar * (145 psi *) Liquid temperature range -5 ... +60 °C (-20 ... +150 °C *) Viscosity range 0.3 - 50,000 mPas (max. 1,000,000 mPas) Dosage precision < 1 % Coefficient of Variation CV Fluid connection 1/8" NPT internal thread, lateral optional 1/8" NPT internal thread, frontal Wetted parts stainless steel 316L (1.4404/1.4435), tungsten carbide Ni-based; shaft seal: graphite-reinforced PTFE, stainless steel 316L; static seals: FPM, optional: EPDM, FFPM Motor brushless DC-servomotor, IP 54, winding 36 V DC, output power 201 W, max. continuous torque 192 mNm Encoder 500 counts per turn, type HEDL 5640 Customized solutions on request. * with optional fluidic seal module, heat insulation module, heating module Contact HNP Mikrosysteme GmbH Bleicherufer 25 ■ D-19053 Schwerin e-mail info@hnp-mikrosysteme.de http://www.hnp-mikrosysteme.de

Open the catalog to page 1
Micro annular gear pump mzr-7208 - 2

Subject to technical changes. Flow charts Liquid water Liquid water Viscosity 1 mPas Flow rate [ml/min] Flow rate [ml/min] Control and software (optional)  speed control S-HV for continuous delivery tasks  servo-amplifier in a rugged aluminum case  supply voltage 11 – 70 V DC, nominal current up to 10 A (optional max. current 20 A)  speed range 10 – 6000 rpm  internal potentiometer for speed control (optional external potentiometer)  item no. 66 03 01 01  speed and position control S-HP-E for continuous and discrete dispensing tasks  4-Q-DC servo amplifier in a rugged aluminum case...

Open the catalog to page 2

All HNP Mikrosysteme GmbH catalogs and technical brochures

  1. mzr-2505

    4 Pages

  2. mzr-4622

    4 Pages

  3. mzr-2921

    4 Pages

  4. mzr-2521

    4 Pages

Archived catalogs