1. Catalogs
  2. Hocoma
  3. Technical Data - Andago V2.0

Technical Data - Andago V2.0

Technical Data - Andago V2.0

Technical Data - Andago V2.0

Product catalog summary
Device Description: The Andago V2.0 is a therapeutic tool designed for physical therapists and clinicians to conduct overground gait and balance training for patients with walking or balance impairments.
Mobile Platform: The device features two electrically driven wheels and four casters, allowing movement in all directions. It includes an intuitive patient-following mode, a straight-line mode for simplified training, and a manual mode for therapist control.
Dynamic Body Weight Support: The device offers an electrically operated patient lift with a dynamic body-weight support range of 0 to approximately 55 kg, adjustable without interrupting training. It provides nearly constant weight support with low inertial forces.
Batteries and Charger: The Andago V2.0 is equipped with rechargeable batteries that last for approximately 8 hours of therapy and can be recharged overnight. The charger is compatible with 100-240 V~ / 50/60 Hz mains connections.
Dimensions and Weight: The outer dimensions are 1.07 m x 0.85 m x 1.95 m, with an inner width of 0.67 m. The device weighs approximately 185 kg.
Space Requirements: The minimal operating space required is 1.5 m x 5 m, while the recommended space is 3.5 m x 7 m.
Operating Conditions: The device should be used on level ground, within a temperature range of 10 °C to 35 °C, and a humidity range of 20% to 75%. It is suitable for altitudes below 3000m.
User Interface: A tethered, hand-held control allows for managing patient lift, body-weight support, training modes, and manual maneuvering. It includes a display for status information.
Adaptability to Patients: The device accommodates patients weighing up to 135 kg and with heights ranging from 135 cm to 200 cm.
Manufacturer Information: The Andago V2.0 is manufactured by Hocoma AG, located in Volketswil, Switzerland. Contact details include phone, fax, and email.
See more

Catalog excerpts

Technical Data - Andago V2.0-1

Technical Data Andago® Version: Device description: Andago V2.0 is a therapeutic tool that allows physical therapists and other clinicians to safely perform overground gait and balance training in patients with walking or balance impairments. • Two electrically driven wheels and four casters for moving forwards, backwards, and turning • Intuitive patient-following mode, enabling the device to move and turn according to the patient’s intention • Straight-line mode, enabling simplified training scenarios without turning • Manual mode, enabling the therapist to steer the device • Electrically operated patient lift, supporting patient setup from sitting position • Dynamic body-weight support range: 0 to approx. 55 kg, continuously adjustable without training interruption • Nearly constant weight support and low inertial forces (patent pending) • Rechargeable batteries with capacity for a whole therapy day (approx. 8 hours of therapy), can be recharged over night • Battery charger, compatible with mains connections with 100-240 V~ / 50/60 Hz • Outer dimensions: 1.07 m (42.1 in) x 0.85 m (33.5 in) x 0.85 m 1.95 m (76.8 in) [l x w x h] • Inner width: 0.67 m (26.38 in) Mobile platform: Dynamic body weight support: Batteries and charger: Dimensions: Space requirements: Minimal operating space: 1.5 m (5 ft) x 5 m (16 ft) [l x w] Recommended operating space: 3.5 m (11.5 ft) x 7 m (23 ft) [l x w] Operating conditions: User interface: Device to be operated only on level ground Temperature: 10 °C - 35 °C Humidity: 20 % - 75 % relative air humidity Altitude / air pressure: < 3000m / 7001060 hPA Tethered, hand-held control which allows to control patient lift, body-weight support, training modes, and manual manoeuvring of the device Display for status information Patient weight max. 135 kg (297.6 lbs) Patient height 135 cm (53.15 in) - 200 cm (78.74 in) All information is subject to change without notice.

 Open the catalog to page 1
Technical Data - Andago V2.0-2

Manufacturer of Andago® Hocoma AG Industriestrasse 4 CH-8604 Volketswil Switzerland Tel. +41 43 444 22 00 Fax +41 43 444 22 01 E-mail: [email protected]

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.