AFT1000+

AFT1000+

AFT1000+

Product catalog summary
Quality Features:
  • Short cables to reduce noise.
  • High sampling frequency for excellent ECG reproduction.
  • High-quality input amplifiers.
  • Capability to record patients with pacemakers.
Comfort Features:
  • Wearable as a pendant.
  • Compatible with adhesive electrodes or a special belt.
  • High patient satisfaction rate.
Reliability Features:
  • Internal chip flash memory to prevent data loss.
  • ECG data is secure until downloaded to a PC.
  • Disposable pouch to prevent nosocomial transmission.
  • Optional electrode disconnection alarm.
Long-Term Recording:
  • Continuous ECG recording for up to 22 days.
Economical Aspects:
  • One standard alkaline battery supports up to 20 recordings or 22 days of recording.
Additional Features:
  • Records environmental data such as battery status, temperature, and spatial position.
  • Fast data transfer to PC via USB2: 4 seconds for 24 hours of data.
Product Specifications:
  • Small and lightweight: 41 x 65 x 14.5 mm, 29g without battery.
  • Economical: One battery for 20 standard recordings, 3 electrodes.
  • Embedded graphic screen for time, date, battery, and ECG signal control.
  • Easy to use for arrhythmia detection, follow-up, pediatric, and sports medicine.
  • Access to long-term recording for syncope and PAF detection.
ECG Features:
  • Recording without compression, 22.5MB/channel/24h at 250Hz.
  • 1 to 3 channels depending on the ECG cable.
  • Resolution: 12 bit, 10µV standard & 2.5µV in HQ mode.
  • Sample rate: 250Hz (standard) & 1000Hz (HQ).
  • Frequency response: 0.05Hz to 80Hz (400Hz HQ) -3dB.
  • Flash internal memory: 0.5 to 1 Gbyte.
  • Pace-maker spikes detection on all channels (HQ recording recommended).
Electrical Specifications:
  • Input impedance: 40M between 2 leads.
  • CMR ratio: >60dB from 10 to 120Hz.
  • Power consumption: <3mW (250Hz 2 tracks).
Environment Recording:
  • Battery voltage resolution: 10mV, 0.1Hz.
  • Temperature resolution: 0.1°C, ±3°C, 0.1Hz.
  • Optional spatial position: X, Y, Z accelerometers, 0.1Hz.
  • Permanent measurement of leads impedances.
Physical Specifications:
  • Dimensions: 41 x 65 x 14.5 mm (1.61” x 2.56” x 0.57”).
  • Weight with battery: 42g (1.5 oz).
  • Enclosure: Molded polycarbonate hard plastic.
  • Display: Built-in graphic OLED.
ECG Connectors:
  • Various configurations for different recording needs, including Holter and pace-maker follow-up.
Battery Specifications:
  • Type: 1 x AAA (LR3) alkaline or rechargeable NiMH battery.
  • Life: 22 days with 1600mAH battery (2 channels 250Hz).
Deconnection Alarm (Optional):
  • Method: Impedance increase indicates disconnection.
  • Emission: Beep every 30s if disconnected, except at night. Can be disabled.
Setup:
  • Automatic adjustment for number of channels and acquisition frequency.
  • Patient name can be written on the case or entered in the file.
Environmental Conditions:
  • Operating temperature: 0°C (32°F) to 45°C (113°F).
  • Non-operating temperature: -20°C (-4°F) to 65°C (149°F).
  • Operating humidity: 10% to 95% (non-condensing).
Warranty:
  • 2 years.
Models:
  • AFT1000+A: Maximum recording duration 10 days.
  • AFT1000+B: Maximum recording duration 22 days.
  • AFT1000+B-XYZ: Same with spatial position sensor.
Installation Kit:
  • Includes Holter recorder, guide, protective pouches, lanyards, USB cable, software license, and battery.
Contact Information:
  • Holter Supplies SAS, Paris, France.
See more

Catalog excerpts

AFT1000+-1

AFT1000+ serie HOLTER recorders Version 2.02 A high technology for ambulatory ECG monitoring AFT1000+ worn as pendant with electrodes AFT worn with the elastic belt with permanent electrodes Small and light : 41 x 65x 14,5mm, 29g without battery Economics : 1 battery for 20 standard recordings, 3 electrodes. Embedded graphic screen to control time – date –battery and ECG signal Very easy to use : arrhythmia detection, follow-up, pediatric, sport medecine… Access to long term recording to detect syncope, PAF…. Short cables reduce noises High sampling frequency for an excellent ECG reproduction High quality input amplifiers Recording of patients with Pace-maker Wearing as pendant Used with adhesives electrodes or with a special belt. High satisfaction rate of patients Internal chip flash memory to avoid risks of bad contacts ECG data cannot be erased until memory is downloaded to the PC Disposable pouch to protect the device and avoid nosocomial transmission Option: electrode disconnection alarm. LONG TERM Continuous recording of ECG up to 22 days 1 standard alkaline battery up to twenty recordings 1 standard alkaline battery up to twenty two days of recording. Recording of environment data (battery, temperature, spatial position…) Fast transfer to the PC with USB2 : 4s/24h. Each recorder is delivered with a 2 channels ECG cable for 250 samples per second and the Quick Reader® software to download and read ECG data on a Windows (XP, Vista, 7, 8, 10…) based PC. User's guide for the recorder is in the memory of the recorder (in pdf format). The

 Open the catalog to page 1
AFT1000+-2

AFT1000+ serie HOLTER recorders Product specifications Environment recording: • • • • Deconnection alarm (option): • • Specification subject to change, please contact our local partner for the latest data. For your first installation, Holter Supplies proposes to you a Kit Holter (ref.:KTH-00 A or B) including all what you need for immediate effectiveness: A suitcase with: 1 Holter recorder A or B +guide, 1 pack of 100 protective pouches, 10 adjustable lanyards, a USB cable for the download, an license for analyzing software on Windows® Quick Reader standard and 1 AAA battery. Look at the web...

 Open the catalog to page 2

All Holter Supplies catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.