Catalogs >
Homoth Medizinelektronik >
Neurotology BERA 4000 (PC-based module)

Neurotology BERA 4000 (PC-based module)
1 / 2Pages

Catalog excerpts

Neurotology BERA 4000 (PC-based module) - 1

BERA 4000 (PC-based module) HOMOTH BERA 4000 PC-module is a real time brainstem audiometer. It is developed considering the latest knowledge of the ENT research. By use of most modern processors, a wide range of possibilities is opened. It is a system lasting into the future for a lot of years, because all changes in diagnostic demands can be loaded as an update or upgrade via software into the system. The software contains pre-selected standard programs, to reduce the operation of the system onto a few keymoves. Beside this, it is possible to create storable measuring programs with individual parameter selections. Further more, the EXPERT-MODE allows to create and change settings during measurement sessions and adapt to changing situations or patients condition. 16 curves can be measured per examination and stored into a temporary memory. The evaluation / analysis can be done afterwards at a later time. All curves are presented high resolution at the colour screen of PC. The program is menu controlled and fitted with a online help. blue line

Open the catalog to page 1

Neurotology BERA 4000 (PC-based module) - 2

System: PC module with USB 2.0 interface System requirements: Pentium PC min. 500 MHz, USB 2.0 Port, Windows XP, 7, 8, 10 (32/64 Bit) Polarity: positive, negative and alternating Masking: 0 - 80 dB white noise Measurement 1 channel (ipsi / contra) EEG amplifier 80 dB / input imp. > 48 MOhm, automatic or manual gain selection Averager: max. 10.000 Sweeps Analysis time: 10 ms (fast potentials) Artefacts: real-time elimination ( time and amplitude ) Power supply: 13,2 V, external power supply 100-240 V, 50/60 Hz, 15 W Accessories: headphone DD 45, measure cable...

Open the catalog to page 2