SA-9600 Series BET Multipoint Surface Area Analyzers Single point surface area Multi-point surface area Anaylsis stations Preparation stations Analysis time 0.10 to > 2000 square meters per gram Typically 6 minutes per sample Typically 6 minutes per point Typically 6 minutes per analysis (three simultaneous samples) <1% relative standard deviation (RSD) Power Requirements Typically 6 minutes per point (three simutaneous samples) 100, 120, 220 or 240 volts AC, 50/60 Hz Maximum peak power 200 Watts, Weight Dimensions HORIBA Instruments, Inc. 34 Bunsen Copyright 2011, HORIBA Instruments, Inc. For further information on this document or our products, please contact us. Irvine, CA 92618 USA Phone: 1-800-446-7422 www.horiba.com/us/particle Email: labinfo@horib

speed, simplicity, precision and economy for your surface area applications To ensure repeatable, accurate measurements the Runs as a stand alone... exceptional convenience and confidence to surface area HORIBA analyzer calibrates the detector and zeros The SA-9603, the three-station analyzer is a complete solution with an on-board computer, full alphanumeric keyboard, vacuum analysis. Now you can perform single-point and multi- the baseline before every analysis. Because it is fully fluorescent display and integrated three-sample de-gas preparation station. Additional de-gas capacity is available...