LOW Energy Swing Door Operators Series 4000LE Heavy Duty Low Energy For High Traffic or Extra Large Barrier-Free Doors Compliant with ANSI A156.19, A117.1 and Americans With Disabilities Act of 1990 Standard system features & benefits • Heavy duty gear drive and 1/8 HP motor designed for high wind conditions, stack pressure and high volume pedestrian traffic. Appropriate for heavy or oversized doors • Choice of mounting type: Surface mount or overhead concealed • Choice of header: 6" x 6" side access or 4 1/2" x 6" bottom access • Available for butt hung, center pivoted or off set pivot door assemblies • Installs easily with no structural changes required Specify Horton and demand AAADM certified installation AUTOMATICS AAA1~W^ American Association of The Automatic choice JT&1L\JLJI V L Automatic Door Manufactun Handicap Accessible Push Plate or Push Button Additional Features/Benefits • Push-N-Go® automatic activation by pushing or pulling door panel obstruction sensing • Easily adjustable opening & closing speeds • Manual operation in case of power failure anodized, paint or clad finishes operators move the door slowly at a rate considered intrinsically safe.

Swing Door Operators ® HD-Swing LE Series 4000LE Heavy Duty Low Energy Once the activating switch is pressed, the Series 4000 LE operator slowly opens the door and holds it open for an adjustable, delayed length of time. This creates a barrier-free doorway and gives the pedestrian time to pass through the door before it slowly closes using spring force of less than 15 pounds (67 N.) Electrical Requirements: Activating device to be located on each side of opening for two-way traffic as per ANSI Safety Standard A117.1 32" (812) 120, 220 VAC, 50 - 60 Hz, single phase, 15 amp service. Current draw...