Architect Specification Guide Specify Swing Door Operators In The Proper Section For automatic door operators Use These Specifications 08 42 29.33 or 08 71 13 Automatic Door Operators Not These Specifications 08 06 71 or 08 71 00 Door Hardware Problem Low Energy/ADA compliant automatic swing door operators are sometimes incorrectly specified in MasterFormat™ 2004 Section 08 06 71 or 08 71 00 “Door Hardware,” typically resulting in an unsatisfied owner and improper entrance operation. Specify automatic swing door operators in Section 08 42 29.33 “Swinging Automatic Entrances” or Section 08 71 13 “Automatic Door Operators” for code compliance, professional installation and years of trouble-free service. With AAADM* certified installation, your clients are assured that: • Automatic operators are properly calibrated and meet applicable codes for mode of operation • Operators are paired correctly with the doors and associated hardware • Product and labor warranties are backed by qualified professionals *Specify Horton and demand AAADM certified installation All hand combinations available

Architect Specification Guide HD-Swing 4100LE & EasyAccess 7100 Low Energy Operators ® Once the activating switch is pressed, the Series 4100LE or 7100 operator slowly opens the door and holds it open for an adjustable length of time. This creates a barrier-free doorway and gives the pedestrian time to pass through the door before it slowly closes using spring force of less than 15 pounds (67 N). Installation and Operation Electrical Requirements: Activating device to be located on each side of opening for two-way traffic as per ANSI Safety Standard A117.1 120 or 220 VAC, 50 - 60 Hz, single phase,...