LOW Energy Swing Door Operators Door system for standard ADA low energy applications Compliant with ANSI A156.19, A117.1 and Americans With Disabilities Act of 1990 Standard system features & benefits • Heavy duty motor designed for standard handicap applications • Surface mount 4" x 6" side access header. Optional 6" x 6" side access available • Available for butt hung and center pivoted door assemblies • Installs easily with no structural changes required Handicap Accessible Specify Horton and demand AAADM certified installation AAA TW^f American Association of Á i~lr\_L/i.Vl Automatic Door Manufactun Surface Applied Operator Additional Features/Benefits • Push-N-Go® automatic activation by pushing or pulling door panel obstruction sensing • Automatic opening with push button or push plate • Easily adjustable opening & closing speeds • Manual operation in case of power failure anodlzed, paint or clad finishes operators move the door slowly at a rate considered intrinsically safe.

Low Energy Swing Door Operators ® EasyAccess Series 7100 Low Energy Once the activating switch is pressed, the Series 7100 operator slowly opens the door and holds it open for an adjustable, delayed length of time. This creates a barrier-free doorway and gives the pedestrian time to pass through the door before it slowly closes using spring force of less than 15 pounds (67 N.) Installation and Operation Electrical Requirements: Activating device to be located on each side of opening for two-way traffic as per ANSI Safety Standard A117.1 32" (812) 24" (610) Minimum 120 VAC Required Minimum 120,...