Architect Specification Guide Specify Swing Door Operators Low Energy/ADA compliant automatic swing door operators are sometimes incorrectly specified In MasterFormat™ 2004 Section 08 06 71 or 08 71 00 "Door Hardware," typically resulting In an unsatisflec owner and Improper entrance operation Specify automatic swing door operators in Section 08 42 29.33 "Swinging Automatic Entrances" or Section 08 71 13 "Automatic Door Operators" for code compliance, professional Installation and years of trouble-free service. With AAADM* certified Installation, your clients are assured that: • Automatic operators are properly calibrated and meet applicable codes for mode of operation • Operators are paired correctly with the doors and associated hardware • Product and labor warranties are backed by qualified professionals 'Specify Horton and demand AAADM certified installation ¿nocTuL/lVl Automatic Door Manufactur For automatic door operators Automatic Door Operators Door Hardware All hand combinations available

Architect Specification Guide single phase, 15 amp service. Current draw - 3.15 amps. from 90° to 10° (Close Check) minimum time delay) operators move the door slowly at a rate considered intrinsically safe Selection Guide Standard Single Units Door Width Header Width Standard Pair Units Pair Width Header Width Maximum Door Width: Maximum Door Weight: Once the activating switch Is pressed, the Series 4100LE or 7100 operator slowly opens the door and holds it open for an adjustable length of time. This creates a barrier-free doorway and gives the pedestrian time to pass through the door before...