Preloaded Injector System | Toric Hydrophobic Aspheric IOL VivinexTM iSert® Textured-rough haptic surface Anterior Axis orientation marks (on posterior surface) Square posterior optic edge Thin and textured optic edge Smooth and regular optic surface Aspheric design Vivinex™ Toric Model name Injector knob Cylinder power at IOL plane Cylinder power at corneal plane2 Optic design Biconvex with square, thin and textured optic edge Anterior: Aspheric design Posterior: Toric design Optic & haptic materials Hydrophobic acrylic Vivinex™ with UV- and blue light filter Haptic design Textured-rough haptic surface Diameter (optic/OAL) +10.00 to +30.00 D (in 0.50 D increments) 1.00 to 6.00 D (T2 to T9) T2 to T3 in 0.50 D increments T3 to T9 in 0.75 D increments Nominal A-constant Optimized constants** Vivinex™ iSert® preloaded Front injector tip outer diameter Recommended incision size For Vivinex™ Toric IOL calculation please visit www.HOYAtoric.com 1 At IOL plane. 2 Based on an average pseudophakic human eye. *The A-constant is presented as a starting point for the lens power calculation. When calculating the exact lens power, it is recommended that calculations be performed individually, based on the equipment used and operating surgeon’s own experience. **These optimized constants for the calculation of intraocular lens power published by IOLCon on their website: https://iolcon.org are calculated from 1,475 clinical results for Vivinex™ Model XY1/XC1 as of Sept. 24, 2021. These constants are based on actual surgical data and are provided by IOLCon as a starting point for individual constant optimizations. The information available on the website is based on data originating from other users and not by HOYA Surgical Optics (“HSO”). HSO therefore does not warrant the correctness, completeness and currentness of the contents on the said website. Information contained is intended for health care professionals. For a full list of indications and contra indications please refer to the Instructions For Use. Some of the products and/or specific features as well as the procedures featured in this document may not be approved in your country and thus may not be available there. Design and specifications are subject to change without prior notice as a result of ongoing technical development. Please contact our regional representative regarding individual availability in your country. HOYA, Vivinex and iSert are trademarks of the HOYA Corporation or its affiliates. ©2021 HOYA Medical Singapore Pte. Ltd. All rights reserved. HOYA Medical Singapore Pte. Ltd | 455A Jalan Ahmad Ibrahim | Singapore 639939 HOYA Surgical Optics GmbH | De-Saint-Exupéry-Straße 10 | 60549 Frankfurt am Main | Germany Hotline DE: Tel. +49 (0)800 664 2 664 | Fax +49 (0)800 774 2 774 hoyasurgicaloptics.com

Preloaded Injector System | Toric Hydrophobic Aspheric IOL Textured-rough haptic surface Axis orientation marks (on posterior surface) Thin and textured optic edge Square posterior optic edge Smooth and regular optic surface Aspheric design Toric design insert shield Vivinex™ Toric multiSert™ Model name Cylinder power at IOL plane Cylinder power at corneal plane2 Optic design Biconvex with square, thin and textured optic edge Anterior: Aspheric design Posterior: Toric design Optic & haptic materials Hydrophobic acrylic Vivinex™ with UV- and blue light filter Haptic design Textured-rough haptic...