COVERALL DISPOSABLE PROTECTIVE COVERALL Guide to EU standards EEC Guideline 2016/425 on personal protective equipment (PPE) Depending on the hazards potential the protective clothing is intended to protect against,PPE is divided into 3 categories: Category I: Basic PPE protects against minimal risks. Category II: PPE that cannot be clearly classified under Category 1 or 3 is assigned to Category 2. Category III: PPE of complex design is intended to protect against danger to life or serious and irreversible injury to health. TYPE 4-5-6 CHEMICAL SPRAY TIGHT COVERALL WL03001 Type 6 limited protection against liquid mist Extremely excellent lightweight and flexible Type 4 & 5 & 6 entry-level chemical protective coverall. Stitched and taped seams provide full seal, no seam holes to allow penetration of dusts and liquids Description - Fabric: Microporous film laminate - Seam Type: Stitched & taped seams - Style: Elasticated hood, waist, wrists and ankles, 2-way zipper with adhesive taped flap and thumb loops - Size: S-4XL - Color available: White Microporous with blue/yellow/grey/red color tape seams Protection Level • EN 14605:2005+A1:2009 - Type 4: Protective clothing against liquid chemicals • N 13982-1:2004+A1:2010-Type 5: Protection against hazardous dry particles • EN 13034: 2005+A1:2009 - Type 6: Protection against light spray of liquids • EN 14126:2003+AC:2004 - Protection against biological hazards and infective agents • EN 1073-2:2002 - Protection against radioactive contamination • EN 1149-5:2008 - Electrostatic Charges •AH vparei most be suitabfy grounded for anti-stabc treatment to be effective. Election at*: propensity may decrease with wearng time and/or severe conditions.