Rubber Pads - MF
1Pages

{{requestButtons}}

Catalog excerpts

Rubber Pads - MF - 1

Vikas Mafund Pads Product Description The Mafund plate is manufactured in two types with the same hardness of 45 Sh. The solid Mafund plate is 15mm thick (MF15) and is best used where there is a very high load of up to 54 kg/cm2 and is made from natural rubber. The hollow Mafund plate 25mm thick (MF25) gives a relatively high deflection. The plate can hold a load of up to 5 kg/cm2 and is made of SBR rubber. Applications The Mafund plate is used for the vibration insulation of larger and heavy machinery, typically under a concrete base. The plates can also be used in buildings for noise and vibration insulation between layers of concrete. It is possible with both types of panel to obtain higher degrees of deflection by layering panels on top of each other. For example look at curves for MF50, which are 2 layers of MF25. MF15: 500 x 250 x 15mm (Mafund solid) MF25: 500 x 250 x 25mm (Mafund hollow) MF50: 500 x 250 x 50mm (Mafund hollow) The area of panels required is determined by the load. The normal static load distribution for a hole MF25 plate (50 x 25 cm) is 5 kg/cm2, which gives a deflection of 2.7 mm. Frequency / Static Load Frequency / Static Load MF25 Deflection, Static Load Deflection, Static Load Frequency / Static Load Web: www.iac-acoustics.com Email: avm@iac-acoustics.com Shop: View our online shop for AVMs Errors and Omissions Excepted (E&OE). Deflection, Stati

Open the catalog to page 1

All Iac Acoustics catalogs and technical brochures

  1. Radio 24-7

    2 Pages

  2. IMG Studios

    2 Pages

  3. Dolby

    2 Pages

  4. BBC Mailbox

    4 Pages

Archived catalogs