The Belly Dancer
8Pages

MANUAL The Belly Dancer

Important Safety Information!  Please read this manual carefully before operating your new IBI Belly Dancer® Shaker.  This manual contains important operating and safety information.  To best use this product, please read the entire manual carefully prior to use.  To avoid possible injury, this product should only be used for its intended purpose. Package Contents | Unpacking Upon receiving this product, please verify all of the noted parts and accessories are contained in this package. Awareness of the stated cautions and warnings contained within this manual,...

Electrical Connections For your personal safety, this unit must be properly grounded. The supplied power cord is equipped with a three-prong, grounded plug, that mates to a standard three-prong grounded wall receptacle. This is done to minimize the possibility of electric shock hazard from this unit. The user should also have the wall receptacle and circuit checked by a qualified electrician to ensure the receptacle is properly grounded prior to use. Where a two-prong wall receptacle is encountered, it is the responsibility of the user to have it replaced with a properly grounded three-prong...

Platform The standard platform that is supplied with the Belly Dancer® shaker is 12” x 12”, and is made from 3/8” cast acrylic. It is extremely durable and is easily cleaned using a mild detergent and water. The platform is also supplied with a non-slip white mat, to help keep the items placed on the shaker platform from moving around during operation. An optional 2nd story platform, 18” x 18” extention platform, and finger mats (used for smaller tubes and vials), are all also available for purchase. Please see the Accessories and Replacement Parts section for additional details....

Should your shaker suddenly cease to operate, first make sure there is power to the circuit to which the shaker is connected. Secondly, check the fuse at the incoming power entry module. It is located in the drawer of the power entry module. Use a small screwdriver to pry the fuse drawer open, and inspect the fuse. A spare fuse is included with the unit from the factory in the event it requires replacing. Always replace a defective fuse with one of equal rating: 630mA slo-blo fuses for 115V units and 315mA slo-blo fuses for 230V units. Warning: If the STATUS light does not illuminate when...

Accessories | Replacement Parts Belly Dancer Accessories Catalog # Description ACCAA0001 Belly Dancer® 2nd Story Platform Kit - 12” x 12” ACCAA0002 Belly Dancer® Nesting Platform Kit - 18” x 18” ACCAA0003 Belly Dancer® Urethane Tube Mat (for multiple size tubes) ACCAA0004 Belly Dancer® Non-Skid Silicone Mat - 12” x 12” ® Belly Dancer® Startup Kits Catalog # Description BDRLS0001 Belly Dancer® - 115V Unit w/2nd Story Platform Kit BDRLS0002 Belly Dancer® - 115V Unit w/Nesting Platform Kit BDRLS0003 Belly Dancer® - 115V Unit w/Urethane Tube Mat BDRLS0004 Belly Dancer® - 220V Unit w/2nd Story...

Looking for a Belly Dancer®, but need more area for your samples? Check out this all-in-one kit that combines the Belly Dancer® shaker along with a second story platform! The second story platform is easy to install and instantly doubles the usable area of the Belly Dancer shaker. It uses 4 1/2” anodized aluminum spacers for maximum stability and platofrm uniformity. Each platform is also supplied with a non-skid mat to hold samples in place while the shaker is in use. See IBI catalog number BDRLS0001 for a 115V Belly Dancer® with the second story platform and BDRLS0004 for a 220V Belly...

7445 Chavenelle Road Dubuque, IA 52002 800-253-4942 (563) 690-0484 info@ibisci.com