PowerLook® Platform
PowerLook® Platform
Both PowerLook and PowerLook Pro+ require a voltage of 100-240 V and frequency of 50/60 Hz with auto-switching capabilities. Power consumption is 300 Watts for PowerLook and 950 Watts for PowerLook Pro+.
Operating temperature ranges from 50 to 95 degrees Fahrenheit (10 to 35 degrees Celsius) for both models. Relative humidity for non-operating conditions is 95% at 30°C non-condensing, while operating conditions range from 20% to 80% non-condensing. The weight is 25 lbs for PowerLook and 40 lbs for PowerLook Pro+. Dimensions are 3.75 (W) x 15.5 (D) x 13 (H) inches for PowerLook and 6.95 (W) x 20.41 (D) x 16.45 (H) inches for PowerLook Pro+. Output heat generated is 25 BTU/hr for PowerLook and 3312.6 BTU/hr for PowerLook Pro+.
PowerLook uses an InWin SLIM DESK chassis with an ASRock Long Life Q87 motherboard, Intel Core i3-4360 Processor, 16 GB DDR3 RAM, integrated Intel HD Graphics 2000, 500 GB 7200 SATA-600 hard drive, and DVD-RW optical drive. PowerLook Pro+ uses a Dell Precision 7820XL chassis with an Intel C611 Series motherboard, two Intel Xeon 4112 processors, 32 GB DDR4 RAM, two NVIDIA RTX 2080Ti GPUs, 500 GB Intel Class 20 SSD, and DVD-ROM optical drive. Both systems run on Windows 10 IoT Enterprise and have two 10/100/1000 BASE-T network connections.
Both systems support SecondLook for 2D Mammography, Density Assessment, and ProFound AI for DBT. They can connect to a maximum of 4 gantries.
Specifications may vary.
Catalog excerpts
300 Watts, 100-240 V, 50/60 Hz Auto Switching 950 Watts, 100-240 V, 50/60 Hz Auto Switching 50 – 95 Degrees Fahrenheit 10 – 35 Degrees Celsius 50 – 95 Degrees Fahrenheit 10 – 35 Degrees Celsius InWin SLIM DESK ASRock Long Life Q87 motherboard Intel® C611 Series (Lewisburg) Intel Core i3-4360 Processor 4M 3.7GHz 2 Intel® Xeon 4112 2.6 GHz processors Integrated Intel HD Graphics 2000 Operating System: Network adapters: Two 10/100/1000 BASE-T Network Connections, RJ45 Output Two 10/100/1000 BASE-T Network Connections, RJ45 Output SecondLook® for 2D Mammography Density Assessment ProFound AI® for DBT SecondLook® for 2D Mammography Density Assessment Power Requirements Voltage / Frequency: Environmental Specifications Operating Temperature: Relative Humidity: Weight: Dimensions: Output Heat Generated: Hardware/Software Specifications Chassis: Board: Graphics Adapter: Hard Drive: Optical Drive: Supported Applications Maximum Number of Gantry Connections Specifications may vary. ©2018 iCAD, Inc. All rights reserved. iCAD, the iCAD and PowerLook logos are trademarks of iCAD, Inc
Open the catalog to page 1All ICAD catalogs and technical brochures
ProFound AI® Risk2 Pages
PowerLook®2 Pages
SecondLook®1 Page
ProFound AI® (2025)2 Pages
VeraLook®2 Pages
Archived catalogs
ProFound AI®2 Pages
SecondLook®1 Page
Radion Hub – Peer Review2 Pages
Axxent® Hub2 Pages
Physics Accessories Kit2 Pages
Surface Applicators2 Pages
Cervical Applicator2 Pages
Vaginal Applicators2 Pages
Rigid Shield2 Pages
Balloon Applicators2 Pages
Controller2 Pages
X-ray Source2 Pages
