ID Bio
32Pages

IMPLANTS DIFFUSION INTERNATIONAL IMPLANTS DIFFUSION INTERNATIONAL IMPLANTS DIFFUSION INTERNATIONAL SinceÊ1987 IMPLANTS DIFFUSION INTERNATIONAL SinceÊ1987 Hexagonal Range / IDBI

IMPLANTS DIFFUSION INTERNATIONAL SinceÊ1987 IMPLANTS DIFFUSION INTERNATIONAL SinceÊ1987 IMPLANTS Since 25 years, IDI firm (Implants Diffusion International), in collaboration DIFFUSION with a team of researchers, engineers and dental surgeons, has regularly INTERNATIONAL developped new products intended to implantology. Implants Diffusion International invests a great deal in the research of new technologies such as RBS drill, state of surface SMA +Tio2, IMPLANTS DIFFUSION Osteosinus… INTERNATIONAL “WE DEVELOP AND MANUFACTURE IN FRANCE” The IDI lines are developped and manufactured in the...

THE QUALITY COMMITMENT OF THE IDI COMPANY / THE LIFETIME WARRANTY IDI - Implants Diffusion International - develops, manufactures and distributes the largest range of dental implants all over the world, as well as implantology and dental surgery equipment. IDI products are manufactured in France exclusively. They’re resulting from the essential work of the Research and Development Department. For IDI, to be close to practitioners, hospitals and implantology training centres is a great deal, because they take part to the constant innovation. The IDI teams, concerned with the trust...

IMPLANTS DIFFUSION INTERNATIONAL IMPLANTS DIFFUSION INTERNATIONAL Implant range and prosthetic systems 05 HEXAGONAL CONNECTION IMPLANTS DIFFUSION INTERNATIONAL IMPLANTS DIFFUSION INTERNATIONAL ACCESSORIES & INSTRUMENTS

HEXAGONAL CONNECTION “The profile of the IDBIO implant is inspiring numerous brands. The association between this profile and a stabilized internal hexagonal connection gives me entire satisfaction.” Dr Justine B. (Belgium)

PRESENTATION The internal conception of the IDBIO implant significantly improves the stabilization of the prosthetic reconstructions thanks to its GSP connection (Groove for Prosthetic Stabilization). The IDBIO benefits from the S.M.A sandblasted, acidetched and TiO2 coated state of surface, from a two-phase Ti6Al4V grade 5. The IDBIO implant draws special attention to itself thanks to its square and V shaped threads and thanks to its anchorage for prosthetic stabilization. This self-condensing implant stands 75 N.cm screwing stress without being affected. This implant draws special...

HEXAGONAL CONNECTION IDBIO IMPLANT RANGE IMPLANT TYPE IMPLANTS DIFFUSION INTERNATIONAL IMPLANTS DIFFUSION INTERNATIONAL IMPLANTS DIFFUSION INTERNATIONAL *On each implant packaging there is a small colored sticker to match with the implant length. The code for each color is related to the one found on the RBS drills for the implants with a hexagonal connection: Color code IMPLANTS DIFFUSION INTERNATIONAL 8 mm length 10 mm length LENGTH 10 IDI IMPLANTS DIFFUSION INTERNATIONAL

SURGICAL PROTOCOL EXAMPLE OF AN IDBIO IMPLANT - FOR THE MANDIBULE (example with the implant placement for an IDBIO implant P/N IDB1240) Use the pilot drill P/N 1220 of 2 mm diameter & 12 mm length. Drill at 650 rpm with ample cooling. Use the 3,5 mm diameter drill & 12 mm length (P/N 123522). Drill with irrigation at 650 rpm. If drilling procedure with bone harvesting: 150 rpm. Use the 4,2 mm diameter drill & 12 mm length (P/N 124223). Drill with irrigation at 650 rpm. If drilling procedure with bone harvesting: 150 rpm. (Omit this step for an implant placement at the maxilla.) Screw the...

Ø 3,5 mm IDBIO healing cap – 2 mm high Ø 3,5 mm IDBIO healing cap – 4 mm high Ø 3,5 mm IDBIO healing cap – 6 mm high IMPORTANT NOTICE: This Closing and Healing CAPS have to be used with the screwdrivers P/N 0014, 0114, 1014, 1114 and 0148. (Please refer to page 29) IDI IMPLANTS DIFFUSION INTERNATIONAL

Prosthetic components Ø 3,5 MM EMERGENCE Fixed Prosthesis Impression copyings Rotational, conical (for solidarized elements) Rotational, straight (for solidarized elements) Titanium abutments for a temporary tooth Non rotational, closed tray technique (for an unitary implant) Non rotational Ø 3,5 mm + retaining screw P/N 1414 Non rotational, pick-up technique, (for an unitary implant) Rotational Ø 3,5 mm + retaining screw P/N 1414 Golden tapped Hexagonal abutments Burnout cylinders Straight Slim abutment for Platform switch + retaining screw P/N 0215 Non rotational, + retaining screw P/N...

HEXAGONAL CONNECTION IMPLANTS DIFFUSION INTERNATIONAL IMPLANTS DIFFUSION INTERNATIONAL IMPLANTS DIFFUSION INTERNATIONAL Fixed Prosthesis Removable Prosthesis IMPLANTS DIFFUSION INTERNATIONAL IDUnit Scanpost (small) + screw P/N 0211 IDUnit attachment Transgingival height: 1 mm Titanium abutment basis, for lab + screw P/N 0215 IDUnit attachment Transgingival height: 2,5 mm Omnicam Scanbody (small) IDUnit attachment Transgingival height: 4 mm Bluecam Scanbody (small) IDUnit attachment Transgingival height: 6 mm 17° angled IDUnit attachment (1 mm high) + screw P/N 0215 30° angled IDUnit...

Prosthetic components Ø 3,5 MM EMERGENCE Removable Prosthesis IDLoc IDLoc attachments Impression copying Impression copying, plastic IDLoc analog Female part Spherical attachments Burnout spherical attachments Burnout spherical attachment Paralleling guide for burnout spherical attachment Connector bar Transgingival height: 6 mm Boxes for spherical attachments Nylon clip O’ring, Height: 3,5 mm External Ø 5 mm O’ring retaining ring for O’ring attachment Screw, REDEIM type Nylon box for spherical attachment

Closing cap Ø 4 mm IDBIO closing cap Ø 4 mm IDBIO healing cap; height: 2 mm Ø 4 mm IDBIO healing cap; height: 4 mm Ø 4 mm IDBIO healing cap; height: 6 mm IMPORTANT NOTICE: This Closing and Healing CAPS have to be used with the screwdrivers P/N 0014, 0114, 1014, 1114 and 0148. (Please refer to page 29) IDI IMPLANTS DIFFUSION INTERNATIONAL