1. Catalogs
  2. IEM
  3. Mobil-O-Graph

Mobil-O-Graph

Mobil-O-Graph

Mobil-O-Graph

Product catalog summary
Overview: The Mobil-O-Graph® is primarily used for 24-hour blood pressure monitoring, with optional pulse wave analysis available through different licenses. The accompanying HMS-CS software is used for data analysis.
General Performance: The device uses an oscillometric principle for measurement and features advanced comfort technologies such as IGI (Initially Gradual Inflation) and SST (Soft Slope Technology) for gentle and time-adjusted measurements. The AF® Logic provides faster and more comfortable measurements, especially during sleep. Pulse Wave Analysis (PWA) is available through a license system.
Communication: The device supports infrared and serial RS232 communication, with a measurement range for systolic pressure of 60 to 290 mmHg, diastolic pressure of 30 to 195 mmHg, and pulse rate of 30 to 240 BPM. It is validated according to ISO 81060-2 and BHS standards.
Power and Operation: The device operates on two Ni-MH power packs or alkaline batteries, with an LCD display and acoustic beeper for control. It can store up to 300 blood pressure measurements or 260 measurements including pulse wave data.
Environmental Specifications: The device operates between +10 °C to +40 °C and 15% to 90% relative humidity. It has an IP rating of IP 42 and weighs approximately 167 g without batteries.
Maintenance and Cuff Sizes: The device requires calibration for the blood pressure module. Cuff sizes range from XS to XL, accommodating arm circumferences from 14 cm to 55 cm.
Standards and Directives: The device complies with multiple directives and standards, including MDD, RED, RoHS, and IEC standards, as well as FCC and FDA regulations.
Recommendations: High-quality batteries are recommended to ensure optimal operating time. IEM GmbH suggests using their rechargeable batteries, available through their commercial department.
See more

Catalog excerpts

Mobil-O-Graph-1

Technical Data Mobil-O-Graph® The typical use of the Mobil-O-Graph® is 24h blood pressure Monitoring. Optionally, pulse wave analysis with different licenses is possible. The values are analyzed by the accompanying HMS-CS software. General Performance Measurement Oscillometric principle 24h ambulatory blood pressure monitoring Advanced comfort IGI (Initially Gradual Inflation): Pressure setting for a gentle measurement SST (Soft Slope Technology): Time adjustment of the measurement according to cuff size (from XS-XL) AF® Logic (Auto-Feedback-Logic): Faster and most convenient measurements First measurement: step-up / step-down technology From the second measurement: Auto-Feedback-Logic - AF® (significantly better night sleep and comfort for the patients through individualized cuff inflation algorithm*) Calculation via license system (via IEM software) Key A: Central blood pressure Key B: Full Pulse Wave Analysis Key C: Central blood pressure + Augmentation Index @75 Serial number range UXXXXX (X – Placeholder for a number sequence) Measurement range Systolic (SYS): 60 to 290 (mmHg) Diastolic (DIA): 30 to 195 (mmHg) Pulse (Pulse): 30 to 240 (BPM, Beats per Minute) Pressure range Pressure accuracy +/- 3 mmHg in display range NIBP Accuracy (non invasive blood pressure measurement) validated according to ISO 81060-2 and BHS (A/A Grading) Measurement frequency Automatic remeasurement A measurement error causes an automatic repetition of measurements after 3 minutes Power supply 2 x Ni-MH power packs, each 1.2 V and min. 1500 mAh (AA, Mignon) 2 x 1.5 V alkaline batteries (AA, Mignon) Display: LCD Acoustic: Beeper Panel: 4 Multifunction buttons Convenience of ambulatory blood pressure monitoring: Comparison of different devices BPMJ 2005, Vol 10 No 10:239-242 Valid for Mobil-O-Graph® PWA | Article number: 010100013 | GTIN: 04041346102269 Rev. 28.06.

 Open the catalog to page 1
Mobil-O-Graph-2

Battery capacity Operation temperature Operation humidity Storage temperature Storage humidity Atmospheric Pressure IP Rating Weight 300 measurements Blood Pressure or 260 measurements Blood Pressure and Pulse wave data >300 measurements with M-Cuff and high-grade batteries 15 % to 90 % relative humidity, non-condensing -20 °C to +50 °C 15 % to 95 % relative humidity, non-condensing 700 hPa to 1060 hPa IP 42 Approx. 167 g (without batteries) Expected service life of the 5 years device Expected service life of the 6 months cuff Performance data of the wireless connections • Infrared Interface:...

 Open the catalog to page 2
Mobil-O-Graph-3

• Directive 93/42/EEC (MDD) Class Ila, Annex IX, rule 10 Use only high-quality batteries. If using less efficient batteries IEM cannot guarantee the operating time specified above. Using batteries of poor quality can reduce operating time to 50 %. IEM GmbH recommends the use of high-quality rechargeable batteries, e.g. IEM's own rechargeable batteries. You can order these via our Commercial department. You can reach us at iem.de/contact. Valid for Mobil-O-Graph® PWA | Article number: 010100013 | GTIN: 04041346102269

 Open the catalog to page 3

All IEM catalogs and technical brochures

  1. IEM Catalogue

    25  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.