cad

Flow Meters

Flow Meters

Product catalog summary
Overview
The document outlines the specifications and features of IMI Adaptas Flow Meters, designed for in-line, real-time flow rate measurement. Key features include real-time data logging via USB, adjustable data smoothing, and compatibility with various tubing sizes. The meters can save multiple calibrations for different liquids and arrive pre-calibrated for aqueous solutions. Factory calibration for common fluids is available upon request, and users can also calibrate the meter themselves.
Specifications
  • Flow Rate Range: Varies by model, from ±0–8000 nL/min to ±0–5.0 mL/min.
  • Standard Calibrated Flow Rate Range: From ±90–7000 nL/min to ±0.2–5.0 mL/min.
  • Accuracy: Ranges from 0.15% to 0.3% of full scale.
  • Repeatability: From 0.01% to 0.05% below full scale.
  • Flow Detection Response Time: 40 milliseconds.
  • Operating Pressure: Varies by model, up to 200 bar (2,900 psi).
  • Operating Temperature: 10 to 50°C (50°F to 122°F).
  • Fluid Connector Type: UNF Taper 6-40 and UNF ¼-28 Flat Bottom.
  • Flow Sensor Inner Diameter: Ranges from 150 μm to 1.8 mm.
  • Flow Sensor Internal Volume: Ranges from 1.5 μL to <90 μL.
Dimensions
  • Flow Meter Plus: Depth: 10.6 cm (4 in), Height: 3.8 cm (1.5 in), Width: 11.4 cm (4.5 in).
  • Flow Meter ECO: Depth: 64.5 cm (6 in), Height: 5.1 cm (2 in), Width: 5.1 cm (2 in).
Flow Meter ECO
The Economy version offers the same functionality as the Flow Meter Plus but lacks a display and manual controls, requiring software control only.
See more

Catalog excerpts

Flow Meters-1

Life Science IMI Adaptas Flow Meters – In-line, real-time flow rate measurement – Real-time data logging via USB cable – Fully adjustable data smoothing – Can save multiple calibrations for different liquids on-board – Arrives calibrated for aqueous solutions – Factory calibration for common fluids is available upon request – Compatible with a wide variety of tubing sizes ranging from 1/8-inch to 360 micron capillary – User can calibrate meter Specifications Nano Flow Rate Range Standard Calibrated Flow Rate Range Accuracy below full scale (% of full scale)* Repeatability below full scale Flow Detection Response Time Operating Pressure Fluid Connector Type 10 to 50°C (50°F to 122°F) UNF ¼-28 Flat Bottom UNF ¼-28 Flat Bottom Flow Sensor Inner Diameter Flow Sensor Internal Volume Operating Temperature * % of scale, or 5% of measured value (which ever value is larger) Dimensions Flow Meter Plus Flow Meter ECO Economy version. Same functionality as the Flow Meter Plus but without the display and manual controls. Software control only. Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in

 Open the catalog to page 1

All IMI Life Science catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.