video corpo cad

FAS 32 mm BACOSOL - 4 Pages

Add to MyMedicalExpo favorites
FAS 32 mm BACOSOL

Catalog excerpts

FAS 32 mm BACOSOL Direct acting solenoid valve > 2/2, 3/2; Manifold mounting > Compact design > High flow rate > High cycle rate of up to 1200 cycles per minute > Up to kv 14 (orifice 8 mm) Technical features Medium: Air, neutral gases and liquids Operation: Direct acting 2-way and 3-way valves, normally closed and normally opened, latching Operating pressure: 0 ... 100 bar (0 ... 1450 psi) Flow kv factor: 0,15 ... 14 (Cv: 0.01 ... 1) Ambient/media temperature: Ambient: -15 ... +50 °C (+5 ... +122°F) Media: -15 ... +140 °C (+5 ... +284°F) Air supply must be dry enough to avoid ice formation at temperatures below +2 °C (+35°F). Materials: Body in contact with media: Stainless steel, brass, PA Seal in contact with media: NBR, FPM,EDPM Electrical details    Following options on request Precision Engineering Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2015 - 5027c) © 2015 Fluid Automation Systems s.a.

 Open the catalog to page 1

Technical data - standard models, G1/4 Symbol Port Function Orifice size G1/4    2/2    NC    0,5 Operating    kv *1) Voltage Seal/Body    Drawing *1) Cv - Value in [gal/min] = kv x 0.07; kv for 3/2 way valves represents flow value between ports 2 and 3 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2015 - 5027c) © 2015 Fluid Automation Systems s.a.

 Open the catalog to page 2

FAS 32 mm BACOSOL Direct acting solenoid valve Dimensions Port identification for BACOSOL, BACOSOL V-type, BACOSOL VL-type and BACOSOL CNOMO-type Dimensions shown in mm Projection/First angle P = Inlet; A = Outlet; R = Exhaust Please refer to marking on the valve body for flow direction or port identification. Alternative pneumatic connections on request V-Type connection (available for 2/2 and 3/2 valves) VL-Type connection (available for 3/2 NC valves only) All valves are supplied with mounting screws and gasket. Our policy is one of continued research and development. We therefore...

 Open the catalog to page 3

FAS 32 mm BACOSOL Direct acting solenoid valve VR-Type connection (available for 3/2 NO valves) 13 Dimensions shown in mm CNOMO-Type connection (available for 2/2 NC & 3/2 NC valves) Projection/First angle Manual override Port identification for BACOSOL VR-type Ports 1 3/2 NO P = Inlet; A = Outlet; R = Exhaust Warning These products are intended for use in air, neutral gas and liquid systems only. Do not use these products where pressures and temperatures can exceed those listed under »Technical features«. Before using these products with fluids other than those specified, for...

 Open the catalog to page 4

All IMI Precision Engineering catalogs and technical brochures

  1. EXPRESS CATALOGUE

    228 Pages

  2. V6 Syringe Pump

    4 Pages

  3. IMI FAS CHIPSOL

    4 Pages

  4. PICOSOL MS

    2 Pages

  5. CHIPSOL MS

    3 Pages