Catalogs >
Norgren FAS MEDIC SA >
IMI FAS FLEXISOL

IMI FAS FLEXISOL
4Pages

Catalog excerpts

IMI FAS 6,5 mm FLEXISOL Direct acting 2-way and 3-way valves > Flow of a 8 mm valve in a 6,5 mm footprint, without usual manufacturing constraints > One-screw mount > Solder free / direct connection on PCB > Captive seals Technical features Medium: Air, oxygen, neutral gases, 40 gm filtered Operation: Direct acting 2-way and 3-way valves, normally closed and normally opened Operating pressure: 0 ... 2,5 bar Flow: See technical data - standard models Leakage: Internal leakage: 10-2 mbar l/s External leakage: 10-2 mbar l/s Mounting: Manifold with M3 mounting screw Orifice: See technical data - standard models Response time: Pneumatic response time (ON): 5 ms Pneumatic response time (OFF): 10 ms Response time measured according to ISO 12238 Materials in contact with the fluid: Body: PPS Seals: NBR, FPM Internal parts: stainless steel, HNBR, FPM Electrical details Voltage tolerance: ± 5 % Following options on request Pneumatic connection Electrical connection Mounting screw Coil orientation Protection class: IP 51 Electrical connection: PAD (0.4 gm galvanic gold over nickel) Technical data - Standard models Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 5023c) © 2016 Fluid Automation Systems s.a.

Open the catalog to page 1

IMI FAS 6,5 mm FLEXISOL Direct acting 2-way and 3-way valves Accessories Test manifold Test manifold with Molex connector Dimensions Sealing area 3:1 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 5023c) © 2016 Fluid Automation Systems s

Open the catalog to page 2

IMI FAS 6,5 mm FLEXISOL Direct acting 2-way and 3-way valves Dimensions in mm Projection/First angle 3 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 5023c) © 2016 Fluid Automation Systems s.a.

Open the catalog to page 3

IMI FAS 6,5 mm FLEXISOL Direct acting 2-way and 3-way valves EN - Englisch Warning These products are intended for use in air, oxygen and neutral gas systems only. Do not use these products where pressures and temperatures can exceed those listed under »Technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult IMI Precision Engineering, Fluid Automation Systems s.a. Through misuse, age, or malfunction, components used in fluid power...

Open the catalog to page 4

IMI FAS FLEXISOL 4Pages

Catalog excerpts

All Norgren FAS MEDIC SA catalogs and technical brochures

IMI FAS FLEXISOL
4Pages