Catalogs >
Norgren FAS MEDIC SA >
Microsol MS-E 15mm Media Separated Solenoid Valve

Microsol MS-E 15mm Media Separated Solenoid Valve
3Pages

Catalog excerpts

Microsol MS-E 15mm Media Separated Solenoid Valve - 1

FAS 15 mm MICROSOL MS-E Media separated solenoid valve > For agressive and sensitive media > Cost effective solution > For medical device, analytical and diagnostic applications > Manifold mounting or barb fittings Technical features Medium: Neutral or aggressive gases and liquids Operation: Direct acting 3-way media separated valves Operating pressure: -0,95 ... 2,2 bar (-13,8 ... 31,9 psi) Flow: kv: 0,6; flow: 33 l/min at Δp = 2 bar, 20°C (+68°F) ) Mounting: Manifold or barb fittings Orifice: 1,6 mm Life expectancy: ≥10 Mio. cycles Weight: 30 g (1,06 lbs) Electrical details Following options on request Voltage tolerance: Power consumption: Electrical connection (leads) Pulse width modulation: Embedded electronics options Coil orientation Materials: Body in contact with media: PEEK or PVDF Seal and diaphragm material in contact with media: FFPM or EPDM Interface design Without integrated pulse width modulation Revert polarity detection: Integrated Electrical connection Orifice sizes Electrical insulation: Insulation class: Protection class: Cycle rate: Technical data - standard models Symbol Orifice Operating pressure Seal / Model Diaphragm Material Barb Fittings Barb Fittings *1) Maximum back pressure during commutation: 50% of operating pressure *2) Cv = 0,07 kv 1 3 *3) Power consumption: "boosting power during approx 50 ms" / "holding power" 2 10 Our policy is one of continued research and development. We therefore reserve the right to amend, without 02/20 notice, the specifications given in this document. (2018 - 9252b) © 2015 Fluid Automation Systems s.a. en 5.

Open the catalog to page 1

Microsol MS-E 15mm Media Separated Solenoid Valve - 2

FAS 15 mm MICROSOL MS-E Media separated solenoid valve Dimensions shown in mm Projection/First angle Seal area All solenoids are supplied with mounting screws and gasket, 15.2 Accessories Mounting M5 manifold with M5 threads - 1 position PEEK Model: S010.2259 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2018 - 9252b) © 2015 Fluid Automation Systems s.a. Valve mount threads

Open the catalog to page 2

Microsol MS-E 15mm Media Separated Solenoid Valve - 3

FAS 15 mm MICROSOL MS-E Media separated solenoid valve Dimensions shown in mm Projection/First angle Warning These products are intended for use with aggressive sensitive media, Please contact IMI Precision Engineering for more compatibility requests. Do not use these products where pressures and temperatures can exceed those listed under »Technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI Precision Engineering. Through...

Open the catalog to page 3