Multi-Channel Syringe Pump
4Pages

> Programmable precision liquid metering device > 60mm stroke driven via stepper motor and precision ball screw > Availalble in two mechanical resolutions: 24K, 48K > Each channel is pre-equipped with a 3/2 solenoid valve > Compatible syringes available in various sizes between 25pL and 5mL > Flexible and versatile to meet a variety of system configurations > Capable of simple closed loop control of an external quantity or process > Non-volatile user program memory and system input/output (I/O) > Can be used a stand alone controller or integrated into more complex systems Multi-Channel Syringe Pump Physical Overall Height 11.67" Overall Width Maxmum: 6.5" (8-Channel manifold) Minimum: 3.2" (2-Channel manifold) Overall Depth 5.75" Weight 6.0 lbs Environmental Operating Temperature 50°F to 131°F (10°C to 55°C) Operating Humidity 5 to 95% RH, non-condensing at 131°F (55°C) Storage Temperature 13°F to 185°F (-25° to 85°C) RoHS and WEEE compliant Lifetime (1) > 5 Million cycles [1 cycle = 1 full dispense and aspirate move] Mechanical Mounting Holes Top and bottom Resolutions 24000 and 48000 increments Maximum Speed 10000 steps/second. Syringe Size (60mm stroke) 25pL to 5mL (supplied separately) Valve Type 3/2 Solenoid Valve each channel PC board Driver/Control board (fully functional motor drivers and control electronics). Card-edge connector Integrated RS232 Integrated power filter Performance 1/10 Stroke Dispense Precision: 0.20% max. Accuracy: 0.60% max. Interface RS-485 or RS-232 communications Data terminal or OEM protocol 1200 to 38.4K baud, 8 data bits, 1 stop bit, no parity, half duplex Three inputs, three output ports Digital voltmeter Switched and wired device address Power Operation 24V (with a maximum power voltage ripple of 720mv peak-to-peak). Power Consumption 80 watts, 11 watts idle. Full Stroke Dispense 0.0092% max. (D Tested using IMI standard test protocol Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. © Norgren Kloehn, Inc. 2017

Multi-Channel Syringe PumpSyringe Pump:Multi-Channel Syringe Pump (with EPDM valve) Multi-Channel Syringe Pump (with FFKM valve) 24K RESOLUTION 48K RESOLUTION CHANNELS PART NUMBER Decals can be added to individual orders as required. description part number Communication cable RS485, 6” long; pump to pump (2 units) 17736 Connector (card edge with solder pins) 26875 Starter Kit (includes all items listed below) 24682 Adapter (card edge to AMP connectors) 23428 Software; operator’s manual; and application notes. 23422 Communications cable (RS232 / 5’ long; pump...

Multi-Channel Syringe Pump © IMI NORGREN 'WHr® < PTFE Syringe Assembly Thread Type %-28 UNF-2A Wetted Materials Borosilicate glass, PCTFE, PTFE Fine Tuning Adjustment Zero Dead Volume Only Zero Dead Volume (ZDV) 29898* 29856* 29858 29441 29443 29448 2945O 29452 29458 *Also, contains stainless steel in wetted path.Tip nose is 316L SS PTFE coated See PDS0011 for additional syringe details. UHMW-PE Syringe Assembly Thread Type 1/4-28 UNF-2A Glass Type Borosilicate glass, PCTFE, UHMW-PE Fine Tuning Adjustment Zero Dead Volume Only Zero Dead Volume (ZDV)...

Multi-Channel Syringe Pump 11.67 [296.4] ©S®®®®®® © © ©@® ®@® © © HO Warning Warranty Improper selection, misuse, age or malfunction of components used in The products described herein are warranted subject to seller’s Standard systems can cause failure in various modes. The system designer is warned Terms and Condition of Sale, available at seller’s website. to consider the failure modes of all component parts and to provide adequate safeguards to prevent personal injury or damage to equipment or property in the event of such failure modes. System designers and end...