V6 Syringe Pump
4Pages

> Programmable precision liquid metering device > 60mm stroke driven via stepper motor and precision ball screw > Availalble in three mechanical resolutions: 12K, 24K, 48K > Flexible and versatile to meet a variety of system configurations > Capable of simple closed loop control of an external quantity or process > Non-volatile user program memory and system input/output (I/O) > Can be used a stand alone controller or integrated into more complex systems > Can be configured with PC board selections to meet specific needs Physical Height 10" Width 2.55" Depth 4.75" (face plate to back plate) 4.90" (face plate to card edge) Weight 5.14 lbs Environmental Operating Temperature 32°F to 131°F (0°C to 55°C) Operating Humidity 5 to 95% RH, non-condensing at 131°F (55°C) Storage Temperature 13°F to 185°F (-25° to 85°C) WEEE & RoHS compliant Lifetime (1) > 5 Million cycles [1 cycle = 1 full dispense and aspirate move] Mechanical Operation Any orientation Mounting Holes Top, bottom and front Resolutions 12000, 24000 and 48000 increments Speed Max. - 10000 steps/sec. Min. - 20 steps / sec. (Default - 5000 steps/sec.) Compatible Syringe Size 10pl to 50ml Compatible Valve Type 2 way to 12 way (Rotary) 3/2 Solenoid valve PC board choices: Base board (sensor array and motor pin out only - no motor drivers or control electronics). Driver board (sensor array and motor drivers only, no control electronics). Driver & Control boards (fully functional motor drivers and control electronics). Card-edge connector Performance 1/10 Stroke Dispense Full Stroke Dispense Interface RS-232 or RS-485 communications Data terminal or OEM protocol 1200 to 38.4K baud, 8 data bits, 1 stop bit, no parity, half duplex Three inputs, three output ports Digital voltmeter Switched and wired device address Power Operation 24V (with a maximum power voltage ripple of 720mv peak-to-peak). Power Consumption 44 watts, 13 watts idle. (D Tested using IMI standard test protocol Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. © Norgren Kloehn, Inc. 2017

SiJ IMI NORGREN V6 Syringe Pump: RESOLUTION 48K X X X X X X X X X 24K 12K VALVE FEATURE NONE SOLENOID X X X X X X DRIVER & CONTROL FEATURE ROTARY BASIC X DRIVER BOARD DRIVER & CONTROL BOARD Decal (23279) is optional, add to order as required. 3-way solenoid valve supplied with pumps configured for solenoid valve. Communication cable RS485, 6" long; pump to pump (2 units) P/N 17736 Connector (card edge with solder pins) P/N 26875 Starter Kit (includes all items listed below) P/N 23427 Adapter (card edge to AMP connectors) P/N 23428 Software; operator's manual; and...

Notes: Valve wetted surfaces have a PCTFE body insert and PTFE plug. Port connection is 1/4-28 UNF Some valve ports may not be accessible when used with certain syringes sizes. See Application Notes for further information. See PDS-0032 for additional information on ceramic, loop and 12way valve options. PTFE Syringes (individually boxed): Size Orifice (in) Standard ZDV Notes: Wetted materials include Borosilicate glass, PCTFE and PTFE UHMW Syringes (individually boxed): Size Orifice (in) Standard ZDV Notes: Wetted materials include Borosilicate glass, PCTFE and UHMW-PE....

Dimensions in inches [mm] Third Angle Projection Warning Improper selection, misuse, age or malfunction of components used in systems can cause failure in various modes. The system designer is warned to consider the failure modes of all component parts and to provide adequate safeguards to prevent personal injury or damage to equipment or property in the event of such failure modes. System designers and end users are cautioned to consult instruction sheets and specifications available from the factory. The system designer/end user is responsible for verifying that all requirements for the...