MatrixT20
22Pages

PREMIUM HOSPITAL BEDS

safety cleaning design A entire new plastics generation for medical purposes, born in our laboratories which we designate by HDPEmedical©. In fact it’s an high density polyethylene compound with some special features: - anti-shock resistence; - anti-allergic chemical composition; - flame retardant. A whole process 100% controlled by IMO: - design; - engineering and moulds manufacturing; - production underneath own technology. safety Safety side-rails complying the standard EN 60601-2-52. Prevents and avoids the risk of injuries on patients accidental falls. Optimum grade of lateral coverage...

full design Worlwide how many medical furniture manufactures control the plastics process used on theirs hospital beds? Just a few! IMO is one of them in our Oporto manufacturing plant. Why? Because just so we might do effective control over this technology without concessions to third parties. Therefore we talk about full design. We are pioneers on this matter. And when we say 'entire' we real mean entire! Knowing: Own design and prototyping inside our R&D shops and laboratories. Moulds engineering and CAD-CAM. Plastic production over own technology. HDPEmedical© Over the last years we did...

Maximum load without long term deformations 1900lb / 865kg Stresses computarized simulation report in Von Mises. 4 sessions test made on Safe Working Load mode. Maximum load 550lb/ 250kg Patient Safe working load (SWL) 408lb / 185kg Obtained deformations in result of maximum load on elastic regimen. Maximum load without long term deformations confiability Matrix T20 bed was designed to hold severe usage conditions, supporting high load stresses, without permanent deformations results. A careful materials selection and a unique frame design, allowed to reach outstanding parameters on...

electric system Hospital bed for general purposes or Continuous Care service, electrically operated by linear actuators and low voltage motors – DC24V. Power supply and motion management is controlled by an electronic unit and has battery back-up system as an option. Mattress surface has 3 articulated sections plus a pelvic fixed section, doing Fowler position by two independent motors. Foot section is manually adjustable by a mechanical rack. Base has two articulated trapezes to do electric height ajustment and Trendelenburg and Anti-trendelenburg positions. option battery back-up Pick a...

disinfection protocol easy cleaning 1. Lay-down all articulations and raise the bed’s height up to it’s maximum. 2. Disconnect the electric power plugg. 3. Despite the electric motors and control commands have a maximum waterproof (IP66) is not advised the cleaning in automatic disinfection machines by hot steam. 4. Manual cleaning: with a sponge, a smooth cloth or a soft bristle brush, clean the bed with a solution of detergent and warm water (maximum 30º). 5. Manual disinfection: We recommend the use of a detergent type “Anios DDSH by Medical Air Liquide”, or Alcohol 70º applied 3 times....

risk of falls Set of full lenght side-rails. Triple bar tubular frame epoxy coated. Folding element made in polyamide. Safety side-rails complying the standard EN 60601-2-52. Prevents and avoids the risk of injuries on patients accidental falls. Optimum grade of lateral coverage about 97%. They are splitted and individually collapsible. The locket on upper position is made by a steel paw and has a safety lever which impedes the accidental triggering. side-rails safe Side-rails with folding mechanism steel made, axles fitted with anti-friction bushings and high resistence arms made in...

Head/foot boards are superiorly removable. As a free option could be provided by locket buttons for a safest transport manouvre. Bed’s corners protected by shock bumpers Ø120mm, made in polyamide. gap 0 Collapsible side-rails folding under the matress surface edge on lowest position. This feature facilitates patient access to the bed and does gap 0 on patient transference to stretchers. Besides decreases the overall width on narrowed spots passage. functions locking Electric functions locking box, cutting off the command action.

shielded castors Large diameter (150 mm) set of castors, ABS shielded. central locking Four castors central locking by bilateral pedals on bed’s footend. directional locking Swivel function locking on just one bed’s castor, allows to drive the bed along the hospital corridors in a linear path, just by one staff person. Locking pedal activates this function on its higher position.

Cod M302 - Beech Tree Decor

TECH. FEATURES 1. Wide open base. 2. Lifting articulated trapeze 3. Castor mechanism design cover. 4. Portable command. 5. Safety side-rails, splitted, collapsible, made in HDPEmedical©. 6. Modular mattress surface with 7 removable sections, made in HDPEmedical©. 7. Articulated back-rest section 0-70º 8. Articulated leg-rest section 0-45º 9. Foot section manually adjustable by a mechanical rack. 10. Head/Foot board made in HDPEmedical©. 11. Shock bumpers Ø120 mm. 12. Head/Foot boards lockers as a free option. 13. Corners design cover. 14. ABS shielded castors Ø150 mm. 15. Central locking...

TECH. DATA Mattress surface: Mattress recommended dimensions: Mattress surface sections lenght: Back: Pelvis: Legs: Feet: External dimensions: Raised side-rails width: Minimum height: Elevation stroke: articulations (±5%) Maximum tilting: Trendelenburg: Anti-trendelenburg: Maximum back-rest raising: Cardiac Chair: Maximum leg-rest raising: Maximum feet-rest raising: Lumbar folding angle: capacities (±5%) Patient maximum loading: Safe Working Loading (SWL): Overall bed weight: Electric tension: Maximum electric power: Batteries electric power:

registry and conformity IMO Matrix hospital beds are officially registred at INFARMED* with registry no. CLI/119/09, dd 2009-12-03, as Medical Devices Class I. * Portuguese Health Authorities, UE recognized and certificated. Product follows UE directive 2007/47/EE, as well as, the following UE standards: EN 60601-2-38 EN 60601-2-52 EN 60601-1 EN 60601-4 EN 60601-1-1 EN 60601-1-2 MDD 93/42/EEC NP EN ISO 9001:2008 (Certifyer EIC E-1318, dd 2009-02-27) Therapeutic purposes: regarding the legislation above mentioned, the current product is a medical device with therapeutic purposes, which may...