FireStream Hospital Waste Incinerator

Product catalog summary

Overview: The Firestream Hospital Waste Incinerator is a modular, free-standing unit designed for the incineration of medical waste. It features primary and secondary combustion chambers and an integrated flue-gas washer, operating on the Pyrolytec Combustion Principle.

Construction: The incinerator is constructed with a rectangular casing made from 6mm mild steel, reinforced externally, and lined internally with high-quality refractory materials suitable for temperatures up to 1400°C. The outer surface temperature ranges from 50 to 55°C.

Burners: The primary chamber includes a temperature/timer-controlled ignition burner with a range of 700 to 800°C. The secondary chamber has two automatic burners that activate below 1050°C. Burners are natural gas or LPG fired, equipped with various control and safety devices.

Integrated Flue-Gas Washer: This system drenches gases from the secondary chamber, filtering particulates and using a re-circulating water system with a maximum consumption of 15 liters per hour.

Chimney: The chimney is designed to BS 4076 standards, reaching a height of 15 meters or more, with internal insulation and external heat-resistant paint.

Control Panel: The panel is sealed to IP64 standards, housing temperature controllers, motor starters, and various indicators and switches for operational control.

Air Supply: Air is supplied by centrifugal fans, with primary air injected at the base of the firebed and secondary air through additional inlets.

Options: Optional features include a water treatment system, automatic ram loader, and vacuum ash unit, enhancing operational efficiency and environmental compliance.

Models Available: Incinerators are available with capacities ranging from 50 to 400 Kg/hour, suitable for hospital waste, and can be natural gas, LPG, or diesel-fired.

Emissions: Emission levels comply with British and EPA standards, with specific limits for particulates, CO, SOx, HCL, NOx, and dioxins.

Technical Specifications: Detailed specifications include chamber volumes, burning capacities, combustion temperatures, and energy consumption metrics.

Contact Information: Incinco Limited, located in Welwyn, Hertfordshire, UK, provides contact details for further inquiries.

Catalog excerpts

FIRESTREAM HOSPITAL WASTE INCINERATOR INTEGRATED FLUE-GAS WASHER

Open the catalog to page 1

Free standing unit requires a ﬂat surface. Modular package type with Primary and Secondary chambers, designed to give a residence time of 2 seconds up to 1000 to 1200˚C. Based on Pyrolytec Combustion Principle. CONSTRUCTION Combined Primary & Secondary chamber casing is rectangular, constructed from 6mm mild steel plate braced & stiffened externally, with 10mm mild steel front plate, all welded to a mild steel box base frame. Internally, the casing forming primary and secondary chambers are lined with high-quality castable refractory and ﬁre-bricks suitable for temperatures up to 1400˚C, backed...

Open the catalog to page 2

CONTROL PANEL The control panel has a hinged door and is sealed to IP64 standard. It houses the primary and secondary temperature controllers, motor starters or relays for fans, burners, fuses and connection terminal. Mounted on the panel door are panel door isolator, primary and secondary chamber temperature indicators, feed timer, motor running lights, burner ﬁring and lockout lights, feed available light and shut-down switch. Operators interface push-buttons and switches. AIR SUPPLY Air for the primary and secondary chamber is provided by direct drive centrifugal fans. Primary air is injected...

Open the catalog to page 3

MODELS AVAILABLE From 50Kg/Hour to 400Kg/Hour burning capacity of Medical/Hospital Waste. Natural Gas/LPG or Diesel Fired Incinerators. Containerised Incinerators for Mobility. EMISSIONS TO ATMOSPHERE* Particulate Dioxins and Furanes Electrical Requirements: Smoke does not exceed No. 1 Ringelmann Scale. Emission levels are in line with the British and EPA standards. * Emission levels printed herein may vary according to the composition of waste, weather conditions, atmospheric pressure, altitude, etc. Incinco Limited | Unit 1, 113-116 Codicote Road, Welwyn, Hertfordshire AL6 9TY, United Kingdom...

Open the catalog to page 4

NATURAL GAS FIRED FIRESTREAM INCINERATOR WITH BUILT-IN GAS WASHER TECHNICAL DATA SHEET FS100-2SGW Primary Chamber Volume Burning Capacity Average Density of Waste Calorific Value of Waste Primary Combustion Temperature Secondary Combustion Temperature Residence Time Refractory/Lining Thickness Refractory Withstand Temperature Combustion/Burning Principle Type 3 (One in Primary Chamber and Two in Secondary Chamber) Chimney Height From 15 meters from ground level when mounted off top of the incinerator Chimney Construction Designed to BS4076 standard; Internally lined with castable insulation Outside...

Open the catalog to page 5

All Incinco catalogs and technical brochures

Incinco Presentation
22 Pages