- Catalogs
- INCYTON GmbH
- CYRIS®
CYRIS®
CYRIS®
- Dimensions: 730 x 1440 x 655 mm; with opened monitor: 1085 x 1055 x 655 mm
- Weight: 230 kg
- Nominal Voltage: 230 VAC ± 10%
- Supply Frequency: 50-60 Hz
- Maximum Intake Current: 12 A
- Fuse Protection: Connect to a separate power circuit with residual circuit breaker B16A
- Protection Rating: IP 20 (protected against object access, not water)
- Temperature Range: 5 - 40 °C
- Relative Humidity: Max 80% rH
- Device Positioning: Dry interiors
- Operating Altitude: Max 2000 m AMSL
- Pollution Degree: Max 2 m AMSL
- Interior: Stainless steel
- Dimensions: 560 x 700 x 400 mm
- Internal Volume: 156 L
- Temperature Range: +18 to +50 °C
- Temperature Step: 0.1 °C
- Relative Humidity Range: 40 - 97% rH
- O2 Range: 1 - 21%
- Dimensions: 420 x 360 x 360 mm
- Weight: 8.5 kg
- Pipetting Volume: 5 - 200 µl
- Radial Operation Range: 180 mm
- Horizontal Positioning Accuracy: ± 35 µm
- Vertical Positioning Accuracy: ± 5 µm
- Maximum Movement Speed: 470 mm/s
- Positioning Time: < 1.8 s
- Maximum Pipette Tips: 24
- Temperature Range: 5 – 40 °C
- Relative Humidity: 10 – 80% (non-condensing)
- Nominal Voltage: 24 VDC
- Dimensions: 100 x 145 x 156.5 mm
- Objectives: 1
- Objective Magnification: x20
- Z-Drive Type: VoiceCoil
- Focus Range/Resolution: 6800 µm / 0.002 µm
- Nominal Voltage: ±15 VDC
- Maximum Current Consumption: 1 A
- Camera Resolution: 12.3 MPx
- Pixel Size: 3.45 µm
- Throughput: 14 wells per second
- Measuring Frequency: 10 kHz
- Impedance Range: 10 - 5000 Ω
- Resistance Range: 10 - 5000 Ω
- Capacity Range: 0.3 - 3000 nF
- Nominal Voltage: 20 mV
- Current Density: < 2 mA/cm²
- Measuring Error: < 2%
- Resolution Impedance Magnitude: 0.01 Ω
- Resolution Impedance Phase: 0.01°
- Frequency Accuracy: < 0.01%
- Current Range: 0.01 - 10 mA
- Sensitivity: 0.01%
- Response Time: 0.01 s
- Signal Drift: 0.1%/d
- Accurateness: < 5%
- Reproducibility: < 2%
- pO2 Measuring Range: 0 - 50%
- pH Measuring Range: 6.0 – 8.5
- Resolution: ± 0.4% pO2, ± 0.05 pH
- Response Time: < 30 s
- Signal Drift: 0.2%/week pO2, 0.1 pH/week
- Accurateness: ± 1.0% at 20.9% pO2, ± 0.2% at pH7
- Reproducibility: < 5%
The document provides comprehensive technical specifications for a multisensor cell analysis platform, detailing dimensions, electrical requirements, environmental conditions, and specific component capabilities such as the incubator, robot, microscope imaging system, cellular impedance, and pH/pO2 measuring device.
Catalog excerpts
The ultimate multisensor cell analysis platform General technical data with opened monitor mm 1085 x 1055 x 655 Electrical supply data Radial operation range mm 180 Vertical positioning accuracy pm ± 5 Maximum intake current A 12 Maximum movement speed mm/s 470 Fuse protection provided by A Connect to a sepa- customer rate power circuit with residual circuit breaker B16A (Device is protected against protected against access Maximum amount of pipette 24 Environmental conditions for storage and operation Relative humidity, maximum % rH 80 Device positioning - Dry interiors Microscope imaging system Z - drive type - VoiceCoil Focus range / resolution pm 6800 / 0.002 Cellular impedance Measuring range impedance Z Q 10 - 5000 Measuring range resistance R Q 10 - 5000 Measuring range capacity C nF 0.3 - 3000 Resolution impedance magnitude Q 0.01 Resolution impedance phase ° 0.01 Reproducibility (well to well) % < 2 Stainless steel interior mm 560 x 700 x 400 pH and pO2 single channel measuring device Setting temperature range °C +18 to +50 Setting temperature step °C 0.1 Setting relative humidity % rH 40 - 97 Signal drift 0.2 % / week 0.1 pH / week Reproducibility (well to well) < 5
Open the catalog to page 1