Modular Room System For Operating Theathres
Open the catalog to page 1Modular Room SystemFor Operating Theatres We ensure complex realization of projects for modular operating theaters and other hospital rooms. Our offer includes measurements on the site, design, production, installation and service. System The flexible, prefabricated, modular system for operating theatres, preparation rooms, scrub areas and other hospital rooms. The design of the modular system is carried out in accordance with technical building requirements. The advantages of the system are: • Quick installation time. • Surfaces easy to clean and disinfect. • Effective prevention against bacteria. •...
Open the catalog to page 2System Elements We offer complex solutions for operating theatres including following elements: • Wall panels system • Ceiling panels system • Laminar ceilings and exhaust grills • Peripheral lights • System doors • Pass boxes • Observation windows and pass-through windows • Medical cabinets • Surgical scrub sinks • Flooring • Control system OPERA • X-ray viewers • Electrical switches and gas sockets • Cameras • Monitors • Clocks.
Open the catalog to page 3Phase 1 - measurements on the site Modular Room System For Operating Theathres Phase 3 - preparation of material fabrication and production r Phase 5 - installation of the wall panels Phase 4 - installation of the substructure on the site
Open the catalog to page 41 Substructure 2 Wall panel (epoxy coated steel) 3 Wall panel (glass with photo) 4 Control panel OPERA Wall System DESIGN Made of individual modular panels, with a maximum joint width of 6 mm. The partition wall system design facilitates the dismantling of any individual panel, to provide easy access for later installations, alterations or repair work. SURFACES • Stainless steel (grade AISI 304 or 316),polished or powder coated. • Galvanized steel, powder coated. • Glass fixed on steel frame, available with decorative photos. The panels are installed to the wall on substructure made of galvanized...
Open the catalog to page 5Modular Room SystemFor Operating Theathres 1 Clamping profile 3 Ceiling panel 5 Nonius hanger-lower Peripheral lights SPECIFICATION • Quick and easy assembling. • Integration with clip-in ceiling panels system. • Luminary coffer made of epoxy coated steel sheet. • Accessories: electronic stabilizing and ignition system with possible light stream adjustment. TECHNICAL DATA • Fluorescent lamps light sources: P[W]: 2x28W, 2x54W, 3x14W, 3x24W, 3x28W, 3x54W, 4x14W, 4x24W, 4x28W, 4x54W. • LED light sources: P[W]: 18 - 123 W. • Available dimensions: 1200x600 mm, 1200x300 mm, 600x600 mm. •...
Open the catalog to page 6Laminar Ceiling Air Diffusers SPECIFICATION • Laminar ceiling air diffusers are special, suspended ceiling device to ensure proper cleanliness and filtration of air supplied to an operating theatre. • Equipped with absolute filters (HEPA) of H13 or H14 class. • Ensure stable, laminar air supply to an operating theatre at 0,15 - 0,3 m/s • The structure and outlets made of stainless steel (304). • Optional outlets made of polyester fabric. • Variety of sizes: multiple 600 or 650 mm sections, for example 1800x1800 mm, 1950 x1950 mm etc. • Air efficiency: from 1340 to 14 380 [m3/h], depends on the...
Open the catalog to page 7Modular Room System For Operating Theathres Hermetic doors The hermetic medical doors are made of stainless steel with brushed surface or epoxy coated. The door leaves are filled with highly-compressed polyurethane foam, providing thermal and acoustic insulation at the same time, assuring light weight and rigidity of the leaf. The doors are tailored to individual customer’s requirements: the dimensions, different shapes and sizes of vision windows, door handles, door frames, optional use of automatics supplied by renowned manufacturers with different activation options.
Open the catalog to page 8Hinged hermetic doors SPECIFICATION • The door leaf and angle door frame are made entirely of stainless steel with brushed surface. • Angle type, inner side door frame • Door fittings made of stainless steel. • Door leaf thickness 40 mm. • Door leaf acoustically and thermally insulated with highly compressed polyurethane foam, density 50 kg/m3, assuring light weight and rigidity of the leaf. • Hygienic silicone gasket cushioning the closing of doors • Drop down seal increasing air tightness and sound insulation • Single or double-leaf doors. OPTIONAL FEATURES • Door available in hermetic option...
Open the catalog to page 9Modular Room SystemFor Operating Theathres Sliding hermetic doors SPECIFICATION • The door leaf and angle door frame are made entirely of stainless steel with brushed surface. • Angle type, inner side door frame • Door fittings made of stainless steel. • Door leaf thickness 40 mm. • Door leaf acoustically and thermally insulated with highly compressed polyurethane foam, density 50 kg/m3, assuring light weight and rigidity of the leaf. • Hygienic silicone gasket cushioning the closing of doors • Drop down seal increasing air tightness and sound insulation • Short or long door handles • Single...
Open the catalog to page 10Pass-boxes SPECIFICATION • Both side hinged doors, with interlocking feature (preventing opening of both at the same time). • Electromagnetic or mechanic opening system. • Hermetic closing. • Vision window made of safe glass. • Made of stainless steel, including handles. Optionally can be produced with lead protection. • Dimensions according to individual customer needs. • Flushed with will panels. Pass-through windows SPECIFICATION • The window consists of two separate glass panes: fixed upper part and sliding lower part, moving on vertical tracks. • The movement is facilitated by mechanism balancing...
Open the catalog to page 11Modular Room SystemFor Operating Theathres Built-in cabinets SPECIFICATION • Built-in cabinets are elements of wall cladding, flushing with wall panels create homogeneous surface. • Available in any configurations: double, single, with glazed or full doors. • Made of stainless steel, optionally epoxy coated. • Dimensions according to individual customer needs. Windows, glass elements SPECIFICATION • Made of stainless steel. • Observation windows flushing with wall panels (fixed or openable), optionally with electrically operated blinds. • Dimensions according to individual customer needs. • Optionally...
Open the catalog to page 121 Page
8 Pages
16 Pages
16 Pages