OMNI EXPRESS PORTABLE PATIENT MONITOR

Product catalog summary

Overview: The OMNI Express is a portable patient monitor designed for low acuity patient monitoring. It features a touch screen, displays three waveforms, and supports simultaneous multi-lead ECG monitoring. It includes battery backup, graphical and tabular trending, and both audible and visual alarms. Advanced ST and arrhythmia detection, quick BP readings recall, and optional EtCO2 and printer are also available.

Specifications:

Safety and Quality: Complies with IEC60601-1-1988, EN60601-1-1, EN60601-2 standards. ISO9001 & EN46001 certified.
Power Requirements: AC 90-264V/47-63Hz, ≤55VA input power. Battery: 12V/4.0AH, with ≥4 hours charge time and ≥2 hours operating time.
ECG: Heart rate range 20-254bpm, ST segment range -0.8 to +0.8mV, 5-lead ECG patient cable, waveform storage of 6 minutes, and defibrillator protected.
Respiration: Measured via thoracic impedance, rate range 0-100rpm with ±2 rpm accuracy.
Pulse Oximetry (SpO2): Range 0-100%, accuracy ±2% (70-100%), ±3% (40-70%).
Non-Invasive Blood Pressure (NIBP): Automatic oscillometric method, systolic range 40-250mmHg for adults/pediatrics, 20-160mmHg for neonates.
Temperature: Dual channel, range 0-50°C, accuracy ±0.1°C.
CO2 Monitoring: Side stream, non-dispersive IR, range 0-99mmHg, automatic calibration.
Display: 8-inch TFT color display with 640x480 pixels resolution.
Recorder (Optional): Built-in 2-channel thermal array recorder, real-time or alarm-triggered waveforms.

Applications: Suitable for patient transport, vital sign spot checks, and continuous bedside monitoring.

Contact Information: Authorized Distributor: 12151 62nd St N #5, Largo FL 33773, USA. Phone: (1) 727-531-8434, Email: [email protected]

Catalog excerpts

OMNI Express PORTABLE PATIENT MONITOR Ready to roll, the Omni Express is the ideal solution for low acuity patient monitoring. Measuring NIPB, SpO2, ECG, and rapid temperature the Omni Express is well suited for patient transport, vital sign spot checks on the general floor, and continuous bedside monitoring. n n n n n Touch Screen n 3 waveforms displayed n Simultaneous multi-lead ECG monitoring n Battery backup Graphical and tabular trending n n Audible and visual alarms Advanced ST and arrhythmia detection Quick BP readings recall Optional EtCo2 Optional printer Advanced, Affordable Medical Technology For The World

Open the catalog to page 1

OMNI EXPRESS TECHNICAL SPECIFICATIONS Safety Approval & Quality System Designed to meet IEC60601-1-1988, EN60601-1-1, EN60601-2 Class II Equipment, double insulated Type BF applied parts ISO9001 & EN46001 Certified Power Requirements Power Supply Input Power Fuses Battery Charge time Operating time Battery Charging Method Discharge Protection AC 90-264V/47-63Hz ≤55VA Two fuse sockets in the rear panel indicated by “FUSE”, O5X20, 2A/250V I 12V/4.0AH sealed lead-acid ≥4 hours ≥2 hours (full recharge) Automatic charging after monitor is connected to AC power supply (with charge protection function)...

Open the catalog to page 2

All Infinium catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list