PORTABLE With Battery Backup Bright Color 5 Inch UPGRADABLE Blood Pressure, SpO2, and 3-Lead ECG Additions UPGRADABLE Printer Option The Omni® Express is a new cost-effective approach to adding blood pressure, pulse oximetry measurement or even capnography measurement. The Omni® Express can be 3-lead ECG. The Omni® Express is well suited for both bed side configured to measure any combination of: capnography (EtCO2), non-invasive blood pressure, SpO2, and ECG. The Omni® Express simplifies clinician use by incorporating a Weighing in at less than 5 LBS the portable Omni Express is touch screen...

The Omni® Express capnograph provides a cutting edge low flow End-tidal CO2 measuring system. The Omni® Express uses a 50/ml per minute sidestream method to deliver the most accurate EtCO2 readings. Low cost sample lines allows the Omni® Express to be the industry’s lowest cost per patient Capnograph. The Omni® Express can be used on both intubated and non-intubated patients. The Omni® Express sample line connection system uses filter cells to eliminate the potential of cross contamination. The Omni® Express Capnograph is beneficial in: PAIN MANAGEMENT MINOR PROCEDURE SEDATION SEDATION DENTISTRY...

OMNI EXPRESS TECHNICAL SPECIFICATIONS: PEFORMANCE SPECIFICATIONS Overpressure Protection: Alarm Limit: Display: 7” color TFT Resolution: 1024×860 Trace: 2 or 3 waveforms Waveforms ECG (I, II, III, aVR, aVL, aVF, V1-V6), PLETH, RESP, ETCO2 Indicator: Alarm indicator Power indicator QRS beep and alarm sound Trend time: From 30 minutes to 72 hours TEMPERATURE (Included with ECG option only) ECG Input: 5 lead or 3 lead ECG cable and standard AAMI line for connection Lead Choice: I, II, III, aVR, aVF, aVL, V Gain Choice: ×0.5, ×1.0, ×2.0 CMRR (common mode rejection ratio): >100 dB at 50 Hz or 60 Hz...