Rail Systems

Rail Systems
1 / 49 PagesView full catalog

Rail Systems

Product catalog summary
Overview:
This document provides comprehensive technical details on medical equipment used in healthcare facilities, focusing on rail systems, flowmeters, vacuum regulators, and various medical accessories. It includes specifications, installation procedures, and recommendations for use.
Rail Systems:
  • Wall Rail Specifications: Made from anodized aluminum or stainless steel, dimensions 10 x 30 mm, with protective rubber ends and wall-mounted slide supports.
  • Installation Procedure: Detailed steps for mounting on different wall types, emphasizing the importance of verifying wall type and avoiding obstructions.
  • Accessories: Joining piece kits available for extending rail sections.
Flowmeters:
  • JUST FLOW F Series: Ball flowmeters for oxygen and medical air, available in scales of 4, 6, or 15 l/min, featuring a 360º twistable scale and options for humidifier bottles.
  • Technical Specifications: Constructed from anodized aluminum, polycarbonate, and brass, with a precision of ±10% and compliance with UNE-EN ISO 15002.
  • JUST FLOW C Series: Dial flowmeters with selectable flow rates for oxygen and medical air, with options for direct outlet to humidifier bottles.
  • Technical Specifications: Made from anodized aluminum, ABS, and stainless steel, with precision varying based on flow rate and compliance with UNE-EN ISO 15002.
Vacuum Regulators:
  • JUST VAC Series: High vacuum regulators for surgical procedures, providing continuous suction with optional positive pressure relief valves for safety.
Key Recommendations:
  • Ensure proper installation by verifying wall type and avoiding obstructions.
  • Consult staff for compatibility with other gases and flow rates.
  • Ground technical rails in critical care areas.
Vacuum Regulators and Suction Units:
  • Specifications and Features: Made from ABS, stainless steel, brass, and NBR, ensuring durability and compliance with medical standards. Mounting options include direct connectors, rail clamps, or Ø38 mm bar flanges.
  • Product Variants: High vacuum regulators (0-760 mmHg), low vacuum regulators (0-160 mmHg), and Venturi-effect suction units.
  • Technical Specifications: High vacuum regulators offer a suction range of 0-760 mmHg, precision of ±2.5% FS, and flow range up to 80 l/min.
Applications:
Designed for use in hospitals and ambulances, providing reliable suction and oxygen supply during medical procedures and emergencies.
Medical Accessories:
  • Tube Holder for Rail: Stainless steel, with holes for sample tubes and a section for disposable gloves, attaches using a pushbutton clamp.
  • Waste Collector Holder for Rail: Made from lacquered aluminum with silicone elastics, includes a metallic ring to secure garbage bags.
  • File Holder: Anodized aluminum and PEA, designed to store A4-sized documents, available for rail or bedhead mounting.
Materials and Manufacturing:
Equipment is primarily manufactured from stainless steel, anodized aluminum, and ABS, ensuring durability and ease of sterilization. Many items are reusable after sterilization.
Design and Functionality:
Features include pushbutton clamps for easy attachment, adjustable components for flexibility, and robust construction for reliability in medical environments.
Contact Information:
Address: C/ Tungsteno 11-15, Arganda del Rey, 28500, Madrid
Phone: +34 91 871 99 50
Website: www.itcsal.com
Email: [email protected]
See more

Catalog excerpts

Rail Systems-3

RAIL SYSTEMS Wall rail Ref.: 13RSYS0000 / 13RSYS2000 / 13RINX0000 / 13RINX2000 Profile systems that, once screwed to the wall, allow the quick attachment of both equipment and accessories on the patient’s bedhead, either for emergency hospitalization or for intensive care.  Profiles available in aluminium or stainless steel, both for brick and plasterboard walls. Aluminium version: Anodized profile of 10 x 30 mm dimensions with two wall mounted slide supports per meter and protective rubber ends. Stainless steel version: Profile of 10 x 30 mm dimensions with two wall mounted slide supports per...

 Open the catalog to page 3
Rail Systems-4

RAIL SYSTEMS Wall rail Ref.: 13RSYS0000 / 13RSYS2000 / 13RINX0000 / 13RINX2000 INSTALATION MANUAL The technical rail kit consist in the following parts:  Support kit for brick walls (13RSYS1000): or Support kit for plasterboard walls (13RSYS3000): C/ Tungsteno 11-15. Arganda del Rey, 28500, Madrid Telf.: +34 91 871 99 50 www.itcsal.com [email protected] 09/2017-Rev.0

 Open the catalog to page 4
Rail Systems-5

RAIL SYSTEMS Wall rail Ref.: 13RSYS0000 / 13RSYS2000 / 13RINX0000 / 13RINX2000 Technical rail and rubber ends for the ends: Important advice:  Before drilling any holes verify the type of wall dealt with.  If unsure of not finding a conduction in the place where the drilling of the holes will be carried out, DO NOT MAKE THEM, ask the hospital employees or qualified personnel.  The drills must be made with a drill bit adequate for the type of wall.  The orientation of the rail supports must always be vertical (see attached pictures).  The technical rails placed in critical care and surgery...

 Open the catalog to page 5
Rail Systems-6

RAIL SYSTEMS Wall rail Ref.: 13RSYS0000 / 13RSYS2000 / 13RINX0000 / 13RINX2000 (Note: Verify, by means of the adequate appliance or consulting with the Head of Maintenance, that the area where the support is going to be fixed, is free of any type of obstacle or canalization, both of gases and electrical). Place the nylon dowels in the drill holes. The lacquered zamak support must be screwed on firmly with the screws provided. The trim shield must be fixed to the end of the lacquered zamak support (Fig. 4). C/ Tungsteno 11-15. Arganda del Rey, 28500, Madrid Telf.: +34 91 871 99 50 www.itcsal.com...

 Open the catalog to page 6
Rail Systems-7

RAIL SYSTEMS Wall rail Ref.: 13RSYS0000 / 13RSYS2000 / 13RINX0000 / 13RINX2000 The trim shield must be fixed to the end of the lacquered zamak support (Fig. 5). Finally, protect the ends with the rubber ends (Fig. 6). Accesories  13ACCS9000 - Joining piece kit for rails, to extend successive parts of rail in a continuous way. For the connection, proceed in the following way: o o Place half of the nut of the kit in one of the sections to connect and attach it with the threaded stud. Place the section to connect and insert the rest of the nut in the rail, tightening the threaded stud (continuity...

 Open the catalog to page 7
Rail Systems-9

JUST FLOW F - Series Ball flowmeters Ref.: See table JUST FLOW F Series flowmeters can be used in medical facilities with an available gas piped network. • Available for oxygen and medical air (consult our staff for other gases). • Scales of 4, 6 or 15 l/min, twistable 360° to facilitate its reading. • Available with a humidifier bottle, selector-bearing direct outlet. By turning a small side handle or a revolver system, the selector diverts the flow of the humidifier to a tube spigot. • It can be provided individually or on a dual version, and it can be mounted either with a direct connector,...

 Open the catalog to page 9
Rail Systems-10

JUST FLOW F - Series Ball flowmeters Ref.: See tableReferences for flow range 0 to 15 l/min Standards JUST FLOW F + Connector JUST FLOW F Double output + Connector JUST FLOW F Double mounting JUST FLOW F Double mounting - Double output JUST FLOW F Rail - Knob clamp JUST FLOW F Rail - Pushbutton clamp JUST FLOW F Rail - Double output - Knob clamp JUST FLOW F Rail - Double output - Pushbutton clamp JUST FLOW F Rail - Double mounting - Knob clamp JUST FLOW F Rail - Double mounting - Pushbutton clamp JUST FLOW F Rail - Double mounting - Double output -Knob clamp JUST FLOW F Rail - Double mounting...

 Open the catalog to page 10
Rail Systems-11

JUST FLOW C - Series Dial flowmeters Ref.: See table JUST FLOW C Series flowmeters can be used in medical facilities with an available gas piped network. • Turning the top control button the operator can select the flow that will be supplied by its inferior connection. This selection appears in the front display. Models available for oxygen and medical air with 4, 8, 15, 25 or 50 l/min top range. • Models available with a direct outlet to a humidifier bottle and with a flow selector which, turning a little front handle, diverts the humidifier flow towards a front nozzle for flexible hoses. •...

 Open the catalog to page 11
Rail Systems-12

JUST FLOW C - Series Dial flowmeters Ref.: See tableReferences for flow range from 0 to 15 l/min Standars Type C/ Tungsteno 11-15. Arganda del Rey, 28500, Madrid Telf.: +34 91 871 99 50 www.itcsal.com itcsal@itcsal. com

 Open the catalog to page 12
Rail Systems-13

JUST FLOW C - Series Dial flowmeter with stabilized pressure Ref.: See table The flowmeter JUST FLOW C Series can be used in medical facilities with an available gas piped network and is especially designed to stabilize the possible differences of pressure in the supply, thanks to a previous regulation step.  Turning the top control button the operator can select the flow that will be supplied by its inferior connection. This selection appears in the front display. Models for oxygen and medical air with top range in 1, 4, or 15 l/min. Models available with a direct outlet to a humidifier bottle...

 Open the catalog to page 13
Rail Systems-14

JUST FLOW C - Series Dial flowmeter with stabilized pressure Ref.: See tableReferences for flow range 0 to 15 l/min Standards Type C/ Tungsteno 11-15. Arganda del Rey, 28500, Madrid Telf.: +34 91 871 99 50 www.itcsal.com itcsal@itcsal. com

 Open the catalog to page 14
Rail Systems-15

JUST VAC Series Vacuum regulators HV Ref.: See table The high vacuum regulator JUST VAC provides regulation of continuous suction for its use in tracheal and pharyngeal ways during surgical procedures and continuous gastric drainage.  The vacuum regulator provides suction from 0 to total suction.  They are classified as High Vacuum / High Flow.  For the safety of the patient, in case of accidental connection to a positive gas pressure, the regulators can be equipped with an optional positive pressure relief valve.  JUST VAC incorporates an ON-OFF dispositive, through which the aspiration...

 Open the catalog to page 15
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.